I want to plot some equation in Matplotlib. But it has different result from Wolframalpha.
This is the equation:
y = 10yt + y^2t + 20
The plot result in wolframalpha is:
But when I want to plot it in the matplotlib with these code
# Creating vectors X and Y
x = np.linspace(-2, 2, 100)
# Assuming α is 10
y = ((10*y*x)+((y**2)*x)+20)
# Create the plot
fig = plt.figure(figsize = (10, 5))
plt.plot(x, y)
The result is:
Any suggestion to modify to code so it has similar plot result as wolframalpha? Thank you
As #Him has suggested in the comments, y = ((10*y*x)+((y**2)*x)+20) won't describe a relationship, so much as make an assignment, so the fact that y appears on both sides of the equation makes this difficult.
It's not trivial to express y cleanly in terms of x, but it's relatively easy to express x in terms of y, and then graph that relationship, like so:
import numpy as np
import matplotlib.pyplot as plt
y = np.linspace(-40, 40, 2000)
x = (y-20)*(((10*y)+(y**2))**-1)
fig, ax = plt.subplots()
ax.plot(x, y, linestyle = 'None', marker = '.')
ax.set_xlim(left = -4, right = 4)
ax.grid()
ax.set_xlabel('x')
ax.set_ylabel('y')
Which produces the following result:
If you tried to plot this with a line instead of points, you'll get a big discontinuity as the asymptotic limbs try to join up
So you'd have to define the same function and evaluate it in three different ranges and plot them all so you don't get any crossovers.
import numpy as np
import matplotlib.pyplot as plt
y1 = np.linspace(-40, -10, 2000)
y2 = np.linspace(-10, 0, 2000)
y3 = np.linspace(0, 40, 2000)
x = lambda y: (y-20)*(((10*y)+(y**2))**-1)
y = np.hstack([y1, y2, y3])
fig, ax = plt.subplots()
ax.plot(x(y), y, linestyle = '-', color = 'b')
ax.set_xlim(left = -4, right = 4)
ax.grid()
ax.set_xlabel('x')
ax.set_ylabel('y')
Which produces this result, that you were after:
Related
I am trying to plot a dashed line in a 3-D Matplotlib plot. I would like to get a dashed line between each (x_pt, y_pt) to its corresponding z_pt.
from mpl_toolkits import mplot3d
import numpy as np
import matplotlib.pyplot as plt
from matplotlib import cm
import matplotlib
matplotlib.rcParams['mathtext.fontset'] = 'cm'
matplotlib.rcParams['axes.labelsize'] = 13
def z_function(x, y):
a = 1
b = 5.1/(4*np.pi**2)
c = 5/np.pi
r = 6
s = 10
t = 1/(8*np.pi)
return a*(y - b*x**2 + c*x - r)**2 + s*(1 - t)*np.cos(x) + s
x = np.linspace(-5, 10, 100)
y = np.linspace(0, 15, 100)
indexes = np.random.randint(0, 100, 5)
x_pt = x[indexes]
y_pt = y[indexes]
z_pt = z_function(x_pt, y_pt)
fig = plt.figure()
ax = fig.gca(projection='3d')
ax.scatter(x_pt, y_pt, color='k', marker='x', depthshade=False)
ax.scatter(x_pt, y_pt, z_pt, color='k', marker='^', depthshade=False)
ax.set_xticks([-5, 0, 5, 10])
ax.set_yticks([0, 5, 10, 15])
ax.set_zticks([100, 200, 300])
ax.view_init(30, -120)
ax.set_xlabel(r'$x_1$')
ax.set_ylabel(r'$x_2$')
ax.zaxis.set_rotate_label(False)
ax.set_zlabel(r'$f(x)$', rotation=0)
ax.w_xaxis.pane.fill = False
ax.w_yaxis.pane.fill = False
ax.w_zaxis.pane.fill = False
plt.show()
Can anyone help me with this?
If I understand your problem correctly, you need to connect the point (x,y,0) to (x,y,z) like so:
for x_,y_,z_ in zip(x_pt, y_pt, z_pt):
ax.plot([x_,x_],[y_,y_],[0,z_], '--', c='grey')
It should be as simple as:
ax.plot(x_pt, y_pt, zs=z_pt, color='blue', marker='--', depthshade=False)
alternatively using:
ax.plot3D(x_pt, y_pt, z_pt, marker='--')
UPDATE:
You will need to create extra dummy coordinates for each point on the x-y axis, like so:
import numpy as np
n = 10 # number of points in the line
for i in len(x_pt):
x_range = np.linspace(0, x_pt[i], n)
y_range = np.linspace(0, y_pt[i], n)
ax.plot3D(x_range, y_range, [z_pt[i]]*n, marker='--')
NOTE: Untested
The figure above is a great artwork showing the wind speed, wind direction and temperature simultaneously. detailedly:
The X axes represent the date
The Y axes shows the wind direction(Southern, western, etc)
The variant widths of the line were stand for the wind speed through timeseries
The variant colors of the line were stand for the atmospheric temperature
This simple figure visualized 3 different attribute without redundancy.
So, I really want to reproduce similar plot in matplotlib.
My attempt now
## Reference 1 http://stackoverflow.com/questions/19390895/matplotlib-plot-with-variable-line-width
## Reference 2 http://stackoverflow.com/questions/17240694/python-how-to-plot-one-line-in-different-colors
def plot_colourline(x,y,c):
c = plt.cm.jet((c-np.min(c))/(np.max(c)-np.min(c)))
lwidths=1+x[:-1]
ax = plt.gca()
for i in np.arange(len(x)-1):
ax.plot([x[i],x[i+1]], [y[i],y[i+1]], c=c[i],linewidth = lwidths[i])# = lwidths[i])
return
x=np.linspace(0,4*math.pi,100)
y=np.cos(x)
lwidths=1+x[:-1]
fig = plt.figure(1, figsize=(5,5))
ax = fig.add_subplot(111)
plot_colourline(x,y,prop)
ax.set_xlim(0,4*math.pi)
ax.set_ylim(-1.1,1.1)
Does someone has a more interested way to achieve this? Any advice would be appreciate!
Using as inspiration another question.
One option would be to use fill_between. But perhaps not in the way it was intended. Instead of using it to create your line, use it to mask everything that is not the line. Under it you can have a pcolormesh or contourf (for example) to map color any way you want.
Look, for instance, at this example:
import matplotlib.pyplot as plt
import numpy as np
from scipy.interpolate import interp1d
def windline(x,y,deviation,color):
y1 = y-deviation/2
y2 = y+deviation/2
tol = (y2.max()-y1.min())*0.05
X, Y = np.meshgrid(np.linspace(x.min(), x.max(), 100), np.linspace(y1.min()-tol, y2.max()+tol, 100))
Z = X.copy()
for i in range(Z.shape[0]):
Z[i,:] = c
#plt.pcolormesh(X, Y, Z)
plt.contourf(X, Y, Z, cmap='seismic')
plt.fill_between(x, y2, y2=np.ones(x.shape)*(y2.max()+tol), color='w')
plt.fill_between(x, np.ones(x.shape) * (y1.min() - tol), y2=y1, color='w')
plt.xlim(x.min(), x.max())
plt.ylim(y1.min()-tol, y2.max()+tol)
plt.show()
x = np.arange(100)
yo = np.random.randint(20, 60, 21)
y = interp1d(np.arange(0, 101, 5), yo, kind='cubic')(x)
dv = np.random.randint(2, 10, 21)
d = interp1d(np.arange(0, 101, 5), dv, kind='cubic')(x)
co = np.random.randint(20, 60, 21)
c = interp1d(np.arange(0, 101, 5), co, kind='cubic')(x)
windline(x, y, d, c)
, which results in this:
The function windline accepts as arguments numpy arrays with x, y , a deviation (like a thickness value per x value), and color array for color mapping. I think it can be greatly improved by messing around with other details but the principle, although not perfect, should be solid.
import numpy as np
import matplotlib.pyplot as plt
from matplotlib.collections import LineCollection
x = np.linspace(0,4*np.pi,10000) # x data
y = np.cos(x) # y data
r = np.piecewise(x, [x < 2*np.pi, x >= 2*np.pi], [lambda x: 1-x/(2*np.pi), 0]) # red
g = np.piecewise(x, [x < 2*np.pi, x >= 2*np.pi], [lambda x: x/(2*np.pi), lambda x: -x/(2*np.pi)+2]) # green
b = np.piecewise(x, [x < 2*np.pi, x >= 2*np.pi], [0, lambda x: x/(2*np.pi)-1]) # blue
a = np.ones(10000) # alpha
w = x # width
fig, ax = plt.subplots(2)
ax[0].plot(x, r, color='r')
ax[0].plot(x, g, color='g')
ax[0].plot(x, b, color='b')
# mysterious parts
points = np.array([x, y]).T.reshape(-1, 1, 2)
segments = np.concatenate([points[:-1], points[1:]], axis=1)
# mysterious parts
rgba = list(zip(r,g,b,a))
lc = LineCollection(segments, linewidths=w, colors=rgba)
ax[1].add_collection(lc)
ax[1].set_xlim(0,4*np.pi)
ax[1].set_ylim(-1.1,1.1)
fig.show()
I notice this is what I suffered.
I've looked at the documentation, but I can't seem to figure out if this is possible -
I have a dataset, with x and y values and discrete z values. Multiple pairs of (x,y) share the same z value. What I want to do is when I mouseover one point with a particular z value, the alpha of all the points with the same z values goes to 1 - i.e., If all the alpha values are initially 0.5, I'd like only the points with the same z value to go to 1.
Here's a minimal working example to illustrate what I'm talking about :
#! /usr/bin/env python
import numpy as np
import matplotlib.pyplot as plt
x = np.random.randn(100)
y = np.random.randn(100)
z = np.arange(0, 10, 1)
z = np.repeat(z, 10)
im = plt.scatter(x, y, c=z, alpha = 0.5)
plt.colorbar(im)
plt.show()
You can probably fake what you want to achieve using a second plot:
import numpy as np
import matplotlib.pyplot as plt
Z = np.zeros(1000, dtype = [("Z", int), ("P", float, 2)])
Z["P"] = np.random.uniform(0.0,1.0,(len(Z),2))
Z["Z"] = np.random.randint(0,50,len(Z))
def on_pick(event):
z = Z[event.ind[0]]['Z']
P = Z[np.where(Z["Z"] == z)]["P"]
selection_plot.set_data(P[:,0],P[:,1])
plt.draw()
fig = plt.figure(figsize=(10,10), facecolor='white')
fig.canvas.mpl_connect('pick_event', on_pick)
ax = plt.subplot(111, aspect=1)
ax.plot(Z['P'][:,0], Z['P'][:,1], 'o', color='k', alpha=0.1, picker=5)
selection_plot, = ax.plot([],[], 'o', color='black', alpha=1.0, zorder=10)
plt.show()
How would I make a countour grid in python using matplotlib.pyplot, where the grid is one colour where the z variable is below zero and another when z is equal to or larger than zero? I'm not very familiar with matplotlib so if anyone can give me a simple way of doing this, that would be great.
So far I have:
x= np.arange(0,361)
y= np.arange(0,91)
X,Y = np.meshgrid(x,y)
area = funcarea(L,D,H,W,X,Y) #L,D,H and W are all constants defined elsewhere.
plt.figure()
plt.contourf(X,Y,area)
plt.show()
You can do this using the levels keyword in contourf.
import numpy as np
import matplotlib.pyplot as plt
fig, axs = plt.subplots(1,2)
x = np.linspace(0, 1, 100)
X, Y = np.meshgrid(x, x)
Z = np.sin(X)*np.sin(Y)
levels = np.linspace(-1, 1, 40)
zdata = np.sin(8*X)*np.sin(8*Y)
cs = axs[0].contourf(X, Y, zdata, levels=levels)
fig.colorbar(cs, ax=axs[0], format="%.2f")
cs = axs[1].contourf(X, Y, zdata, levels=[-1,0,1])
fig.colorbar(cs, ax=axs[1])
plt.show()
You can change the colors by choosing and different colormap; using vmin, vmax; etc.
I have to plot data which is in the following format :
x = range(6)
y = range(11)
and z depends on x, y
For each value of x, there should be a continuous curve that shows the variation of z w.r.t y and the curves for different values of x must be disconnected
I am using mplot3d and it is not very clear how to plot disconnected curves.
This is what it looks like using bar plots.
You could overlay multiple plots using Axes3D.plot:
import matplotlib.pyplot as plt
import mpl_toolkits.mplot3d.axes3d as axes3d
import numpy as np
x = np.arange(6)
y = np.linspace(0, 11, 50)
z = x[:, np.newaxis] + y**2
fig = plt.figure()
ax = fig.add_subplot(1, 1, 1, projection = '3d')
for xval, zrow in zip(x, z):
ax.plot(xval*np.ones_like(y), y, zrow, color = 'black')
plt.show()