error encountered while pip installing SPAMS - python

While doing pip install SPAMS, I encountered the following error:
(base) C:\Users\Foram>pip install spams
Collecting spams
Using cached spams-2.6.5.4.tar.gz (2.0 MB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Requirement already satisfied: Pillow>=6.0 in c:\users\foram\anaconda3\lib\site-packages (from spams) (8.0.1)
Requirement already satisfied: scipy>=1.0 in c:\users\foram\appdata\roaming\python\python38\site-packages (from spams) (1.4.1)
Requirement already satisfied: numpy>=1.12 in c:\users\foram\anaconda3\lib\site-packages (from spams) (1.21.2)
Building wheels for collected packages: spams
Building wheel for spams (pyproject.toml) ... error
error: subprocess-exited-with-error
× Building wheel for spams (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [29 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-cpython-38
creating build\lib.win-amd64-cpython-38\spams_wrap
copying spams_wrap\spams_wrap.py -> build\lib.win-amd64-cpython-38\spams_wrap
copying spams_wrap\__init__.py -> build\lib.win-amd64-cpython-38\spams_wrap
creating build\lib.win-amd64-cpython-38\spams
copying spams\spams.py -> build\lib.win-amd64-cpython-38\spams
copying spams\__init__.py -> build\lib.win-amd64-cpython-38\spams
creating build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\run.py -> build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\test_decomp.py -> build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\test_dictLearn.py -> build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\test_linalg.py -> build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\test_prox.py -> build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\test_spams.py -> build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\test_utils.py -> build\lib.win-amd64-cpython-38\spams\tests
copying spams\tests\__init__.py -> build\lib.win-amd64-cpython-38\spams\tests
creating build\lib.win-amd64-cpython-38\spams\data
copying spams\data\boat.png -> build\lib.win-amd64-cpython-38\spams\data
copying spams\data\lena.png -> build\lib.win-amd64-cpython-38\spams\data
copying spams\version -> build\lib.win-amd64-cpython-38\spams
running build_ext
cl : Command line error D8021 : invalid numeric argument '/Wunused-variable'
C:\Users\Foram\AppData\Local\Temp\pip-build-env-t_3qg0ji\overlay\Lib\site-packages\setuptools\_distutils\_msvccompiler.py:539: UserWarning: Fallback spawn triggered. Please update distutils monkeypatch.
warnings.warn("Fallback spawn triggered. Please update distutils monkeypatch.")
error: Command "C:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Tools\MSVC\14.21.27702\bin\HostX86\x64\cl.exe /c /nologo /O2 /W3 /GL /DNDEBUG /MD -Ispams_wrap -Ispams_wrap\linalg -Ispams_wrap\prox -Ispams_wrap\decomp -Ispams_wrap\dictLearn -IC:\Users\Foram\AppData\Local\Temp\pip-build-env-t_3qg0ji\overlay\Lib\site-packages\numpy\core\include -Ic:\users\foram\anaconda3\include -Ic:\users\foram\anaconda3\include -Ic:\users\foram\anaconda3\include -Ic:\users\foram\anaconda3\Include -IC:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Tools\MSVC\14.21.27702\ATLMFC\include -IC:\Program Files (x86)\Microsoft Visual Studio\2019\Community\VC\Tools\MSVC\14.21.27702\include -IC:\Program Files (x86)\Windows Kits\10\include\10.0.17763.0\ucrt -IC:\Program Files (x86)\Windows Kits\10\include\10.0.17763.0\shared -IC:\Program Files (x86)\Windows Kits\10\include\10.0.17763.0\um -IC:\Program Files (x86)\Windows Kits\10\include\10.0.17763.0\winrt -IC:\Program Files (x86)\Windows Kits\10\include\10.0.17763.0\cppwinrt /EHsc /Tpspams_wrap/spams_wrap.cpp /Fobuild\temp.win-amd64-cpython-38\Release\spams_wrap\spams_wrap.obj -DNDEBUG -DUSE_BLAS_LIB -std=c++11 -fPIC -Wunused-variable -Wno-uninitialized -m64" failed with exit status 2
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for spams
Failed to build spams
ERROR: Could not build wheels for spams, which is required to install pyproject.toml-based projects
I tried searching solutions for the following:
Command line error D8021 : invalid numeric argument '/Wunused-variable'
Fallback spawn triggered. Please update distutils monkeypatch.
Could not build wheels for spams, which is required to install pyproject.toml-based projects
However, I could not find any clear solution. It would be great, if I could get some help.
Specs for my system is
Windows-10 64 bit
Python 3.8.5

Related

pip install mod_wsgi issue

install is failing and cant figure out why. ive spent a lot of time researching this issue and half of the people are saying the apache24 folder is in the wrong place, which ive double checked its correct. and the other half say its because windows sdk tools are not installed, which ive double checked they are.
PS C:\Users\Mlong\Downloads\ZTP 4\ZTP> pip install mod_wsgi
Collecting mod_wsgi
Using cached mod_wsgi-4.9.4.tar.gz (497 kB)
Preparing metadata (setup.py) ... done
Building wheels for collected packages: mod_wsgi
Building wheel for mod_wsgi (setup.py) ... error
error: subprocess-exited-with-error
× python setup.py bdist_wheel did not run successfully.
│ exit code: 1
╰─> [31 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-3.10
creating build\lib.win-amd64-3.10\mod_wsgi
copying src\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi
creating build\lib.win-amd64-3.10\mod_wsgi\server
copying src\server\apxs_config.py -> build\lib.win-amd64-3.10\mod_wsgi\server
copying src\server\environ.py -> build\lib.win-amd64-3.10\mod_wsgi\server
copying src\server\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\server
creating build\lib.win-amd64-3.10\mod_wsgi\server\management
copying src\server\management\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\server\management
creating build\lib.win-amd64-3.10\mod_wsgi\server\management\commands
copying src\server\management\commands\runmodwsgi.py -> build\lib.win-amd64-3.10\mod_wsgi\server\management\commands
copying src\server\management\commands\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\server\management\commands
creating build\lib.win-amd64-3.10\mod_wsgi\docs
copying docs\_build\html\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\docs
creating build\lib.win-amd64-3.10\mod_wsgi\images
copying images\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\images
copying images\snake-whiskey.jpg -> build\lib.win-amd64-3.10\mod_wsgi\images
running build_ext
building 'mod_wsgi.server.mod_wsgi' extension
creating build\temp.win-amd64-3.10
creating build\temp.win-amd64-3.10\Release
creating build\temp.win-amd64-3.10\Release\src
creating build\temp.win-amd64-3.10\Release\src\server
C:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.34.31933\bin\HostX86\x64\cl.exe /c /nologo /Ox /W3 /GL /DNDEBUG /MD -Ic:\Apache24/include -IC:\Users\Mlong\scoop\apps\python\current\include -IC:\Users\Mlong\scoop\apps\python\current\Include -IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.34.31933\include -IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.34.31933\ATLMFC\include -IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Auxiliary\VS\include /Tcsrc/server\mod_wsgi.c /Fobuild\temp.win-amd64-3.10\Release\src/server\mod_wsgi.obj
mod_wsgi.c
C:\Users\Mlong\AppData\Local\Temp\pip-install-_ff1h4o2\mod-wsgi_515cd9eaaab14ec4b1614328e8f7a27a\src\server\wsgi_apache.h(39): fatal error C1083: Cannot open include file: 'ws2tcpip.h': No such file or directory
error: command 'C:\\Program Files (x86)\\Microsoft Visual Studio\\2022\\BuildTools\\VC\\Tools\\MSVC\\14.34.31933\\bin\\HostX86\\x64\\cl.exe' failed with exit code 2
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for mod_wsgi
Running setup.py clean for mod_wsgi
Failed to build mod_wsgi
Installing collected packages: mod_wsgi
Running setup.py install for mod_wsgi ... error
error: subprocess-exited-with-error
× Running setup.py install for mod_wsgi did not run successfully.
│ exit code: 1
╰─> [31 lines of output]
running install
running build
running build_py
creating build
creating build\lib.win-amd64-3.10
creating build\lib.win-amd64-3.10\mod_wsgi
copying src\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi
creating build\lib.win-amd64-3.10\mod_wsgi\server
copying src\server\apxs_config.py -> build\lib.win-amd64-3.10\mod_wsgi\server
copying src\server\environ.py -> build\lib.win-amd64-3.10\mod_wsgi\server
copying src\server\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\server
creating build\lib.win-amd64-3.10\mod_wsgi\server\management
copying src\server\management\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\server\management
creating build\lib.win-amd64-3.10\mod_wsgi\server\management\commands
copying src\server\management\commands\runmodwsgi.py -> build\lib.win-amd64-3.10\mod_wsgi\server\management\commands
copying src\server\management\commands\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\server\management\commands
creating build\lib.win-amd64-3.10\mod_wsgi\docs
copying docs\_build\html\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\docs
creating build\lib.win-amd64-3.10\mod_wsgi\images
copying images\__init__.py -> build\lib.win-amd64-3.10\mod_wsgi\images
copying images\snake-whiskey.jpg -> build\lib.win-amd64-3.10\mod_wsgi\images
running build_ext
building 'mod_wsgi.server.mod_wsgi' extension
creating build\temp.win-amd64-3.10
creating build\temp.win-amd64-3.10\Release
creating build\temp.win-amd64-3.10\Release\src
creating build\temp.win-amd64-3.10\Release\src\server
C:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.34.31933\bin\HostX86\x64\cl.exe /c /nologo /Ox /W3 /GL /DNDEBUG /MD -Ic:\Apache24/include -IC:\Users\Mlong\scoop\apps\python\current\include -IC:\Users\Mlong\scoop\apps\python\current\Include -IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.34.31933\include -IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Tools\MSVC\14.34.31933\ATLMFC\include -IC:\Program Files (x86)\Microsoft Visual Studio\2022\BuildTools\VC\Auxiliary\VS\include /Tcsrc/server\mod_wsgi.c /Fobuild\temp.win-amd64-3.10\Release\src/server\mod_wsgi.obj
mod_wsgi.c
C:\Users\Mlong\AppData\Local\Temp\pip-install-_ff1h4o2\mod-wsgi_515cd9eaaab14ec4b1614328e8f7a27a\src\server\wsgi_apache.h(39): fatal error C1083: Cannot open include file: 'ws2tcpip.h': No such file or directory
error: command 'C:\\Program Files (x86)\\Microsoft Visual Studio\\2022\\BuildTools\\VC\\Tools\\MSVC\\14.34.31933\\bin\\HostX86\\x64\\cl.exe' failed with exit code 2
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
× Encountered error while trying to install package.
╰─> mod_wsgi
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

How to fix error in installing NLPre in Anaconda?

I am new relatively new to Python and working with Anaconda and I attempting to install NLPre using the following commands within the Anaconda command prompt:
pip install nlpre
The install hangs when installing build dependencies for spacy 2.1.0 and I get the following long output:
Collecting spacy==2.1.0
Using cached spacy-2.1.0.tar.gz (27.7 MB)
Installing build dependencies ... error
error: subprocess-exited-with-error
Collecting setuptools
Using cached setuptools-65.0.2-py3-none-any.whl (1.2 MB)
Collecting wheel>0.32.0.<0.33.0
Using cached wheel-0.37.1-py2.py3-none-any.whl (35 kB)
Collecting Cython
Using cached Cython-0.29.32-py2.py3-none-any.whl (986 kB)
Collecting cymem<2.1.0,>=2.0.2
Using cached cymem-2.0.6-cp39-cp39-win_amd64.whl (36 kB)
Collecting preshed<2.1.0,>=2.0.1
Using cached preshed-2.0.1.tar.gz (113 kB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Collecting murmurhash<1.1.0,>=0.28.0
Using cached murmurhash-1.0.8-cp39-cp39-win_amd64.whl (18 kB)
Collecting thinc==7.0.0.dev6
Using cached thinc-7.0.0.dev6.tar.gz (1.9 MB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Collecting blis<0.3.0,>=0.2.1
Using cached blis-0.2.4.tar.gz (1.5 MB)
Preparing metadata (setup.py): started
Preparing metadata (setup.py): finished with status 'done'
Collecting thinc_gpu_ops<0.1.0,>=0.0.1
Using cached thinc_gpu_ops-0.0.4-py3-none-any.whl
Collecting numpy>=1.7.0
Using cached numpy-1.23.2-cp39-cp39-win_amd64.whl (14.7 MB)
Collecting wrapt<1.11.0,>=1.10.0
Using cached wrapt-1.10.11-py3-none-any.whl
Collecting plac<1.0.0,>=0.9.6
Using cached plac-0.9.6-py2.py3-none-any.whl (20 kB)
Collecting tqdm<5.0.0,>=4.10.0
Using cached tqdm-4.64.0-py2.py3-none-any.whl (78 kB)
Collecting six<2.0.0,>=1.10.0
Using cached six-1.16.0-py2.py3-none-any.whl (11 kB)
Collecting wasabi<1.1.0,>=0.0.9
Using cached wasabi-0.10.1-py3-none-any.whl (26 kB)
Collecting srsly<1.1.0,>=0.0.5
Using cached srsly-1.0.5-cp39-cp39-win_amd64.whl (177 kB)
Collecting colorama
Using cached colorama-0.4.5-py2.py3-none-any.whl (16 kB)
Building wheels for collected packages: thinc, preshed, blis
Building wheel for thinc (setup.py): started
Building wheel for thinc (setup.py): finished with status 'error'
error: subprocess-exited-with-error
python setup.py bdist_wheel did not run successfully.
exit code: 1
[176 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-3.9
creating build\lib.win-amd64-3.9\thinc
#I deleted some repetitive copy steps to save characters
copying thinc\extra\search.cpp -> build\lib.win-amd64-3.9\thinc\extra
running build_ext
building 'thinc.linalg' extension
creating build\temp.win-amd64-3.9
creating build\temp.win-amd64-3.9\Release
creating build\temp.win-amd64-3.9\Release\thinc
"C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\bin\HostX86\x64\cl.exe" /c /nologo /O2 /W3 /GL /DNDEBUG /MD -IC:\Users\hudsonad\Anaconda3\include -IC:\Users\hudsonad\AppData\Local\Temp\1\pip-install-xwlhseua\thinc_528ca1a5c727434bb1c9be6a9cf85be1\include -IC:\Users\hudsonad\Anaconda3\include -IC:\Users\hudsonad\Anaconda3\Include "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\include" "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\ATLMFC\include" "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Auxiliary\VS\include" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.22000.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\um" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\shared" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\winrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\cppwinrt" "-IC:\Program Files (x86)\Windows Kits\NETFXSDK\4.8\include\um" /EHsc /Tpthinc/linalg.cpp /Fobuild\temp.win-amd64-3.9\Release\thinc/linalg.obj /Ox /EHsc
linalg.cpp
thinc/linalg.cpp(201): warning C4804: '/': unsafe use of type 'bool' in operation
thinc/linalg.cpp(1910): warning C4244: '=': conversion from 'double' to '__pyx_t_5thinc_8typedefs_weight_t', possible loss of data
thinc/linalg.cpp(2350): warning C4244: '=': conversion from 'double' to '__pyx_t_5thinc_8typedefs_weight_t', possible loss of data
thinc/linalg.cpp(2397): warning C4244: '=': conversion from 'double' to '__pyx_t_5thinc_8typedefs_weight_t', possible loss of data
thinc/linalg.cpp(2564): warning C4244: '=': conversion from 'double' to '__pyx_t_5thinc_8typedefs_weight_t', possible loss of data
thinc/linalg.cpp(3232): warning C4244: 'argument': conversion from 'double' to '__pyx_t_5thinc_8typedefs_weight_t', possible loss of data
thinc/linalg.cpp(3872): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
thinc/linalg.cpp(3897): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
thinc/linalg.cpp(3916): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
thinc/linalg.cpp(3927): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
error: command 'C:\\Program Files\\Microsoft Visual Studio\\2022\\Community\\VC\\Tools\\MSVC\\14.33.31629\\bin\\HostX86\\x64\\cl.exe' failed with exit code 2
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for thinc
Running setup.py clean for thinc
Building wheel for preshed (setup.py): started
Building wheel for preshed (setup.py): finished with status 'error'
error: subprocess-exited-with-error
python setup.py bdist_wheel did not run successfully.
exit code: 1
[42 lines of output]
C:\Users\hudsonad\Anaconda3\lib\site-packages\setuptools\installer.py:27: SetuptoolsDeprecationWarning: setuptools.installer is deprecated. Requirements should be satisfied by a PEP 517 installer.
warnings.warn(
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-3.9
creating build\lib.win-amd64-3.9\preshed
copying preshed\about.py -> build\lib.win-amd64-3.9\preshed
copying preshed\__init__.py -> build\lib.win-amd64-3.9\preshed
creating build\lib.win-amd64-3.9\preshed\tests
copying preshed\tests\test_counter.py -> build\lib.win-amd64-3.9\preshed\tests
copying preshed\tests\test_hashing.py -> build\lib.win-amd64-3.9\preshed\tests
copying preshed\tests\test_pop.py -> build\lib.win-amd64-3.9\preshed\tests
copying preshed\tests\__init__.py -> build\lib.win-amd64-3.9\preshed\tests
copying preshed\counter.pyx -> build\lib.win-amd64-3.9\preshed
copying preshed\maps.pyx -> build\lib.win-amd64-3.9\preshed
copying preshed\counter.pxd -> build\lib.win-amd64-3.9\preshed
copying preshed\maps.pxd -> build\lib.win-amd64-3.9\preshed
copying preshed\__init__.pxd -> build\lib.win-amd64-3.9\preshed
running build_ext
building 'preshed.maps' extension
creating build\temp.win-amd64-3.9
creating build\temp.win-amd64-3.9\Release
creating build\temp.win-amd64-3.9\Release\preshed
"C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\bin\HostX86\x64\cl.exe" /c /nologo /O2 /W3 /GL /DNDEBUG /MD -IC:\Users\hudsonad\Anaconda3\include -IC:\Users\hudsonad\Anaconda3\include -IC:\Users\hudsonad\Anaconda3\Include "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\include" "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\ATLMFC\include" "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Auxiliary\VS\include" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.22000.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\um" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\shared" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\winrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\cppwinrt" "-IC:\Program Files (x86)\Windows Kits\NETFXSDK\4.8\include\um" /EHsc /Tppreshed/maps.cpp /Fobuild\temp.win-amd64-3.9\Release\preshed/maps.obj /Ox /EHsc
maps.cpp
preshed/maps.cpp(5728): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
preshed/maps.cpp(5740): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
preshed/maps.cpp(5749): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
preshed/maps.cpp(5755): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
preshed/maps.cpp(5761): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
preshed/maps.cpp(5767): error C2039: 'tp_print': is not a member of '_typeobject'
C:\Users\hudsonad\Anaconda3\include\cpython/object.h(193): note: see declaration of '_typeobject'
preshed/maps.cpp(6129): warning C4996: '_PyUnicode_get_wstr_length': deprecated in 3.3
preshed/maps.cpp(6145): warning C4996: '_PyUnicode_get_wstr_length': deprecated in 3.3
error: command 'C:\\Program Files\\Microsoft Visual Studio\\2022\\Community\\VC\\Tools\\MSVC\\14.33.31629\\bin\\HostX86\\x64\\cl.exe' failed with exit code 2
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for preshed
Running setup.py clean for preshed
Building wheel for blis (setup.py): started
Building wheel for blis (setup.py): finished with status 'error'
error: subprocess-exited-with-error
python setup.py bdist_wheel did not run successfully.
exit code: 1
[33 lines of output]
BLIS_COMPILER? None
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-3.9
creating build\lib.win-amd64-3.9\blis
copying blis\about.py -> build\lib.win-amd64-3.9\blis
copying blis\benchmark.py -> build\lib.win-amd64-3.9\blis
copying blis\__init__.py -> build\lib.win-amd64-3.9\blis
creating build\lib.win-amd64-3.9\blis\tests
copying blis\tests\common.py -> build\lib.win-amd64-3.9\blis\tests
copying blis\tests\test_dotv.py -> build\lib.win-amd64-3.9\blis\tests
copying blis\tests\test_gemm.py -> build\lib.win-amd64-3.9\blis\tests
copying blis\tests\__init__.py -> build\lib.win-amd64-3.9\blis\tests
copying blis\cy.pyx -> build\lib.win-amd64-3.9\blis
copying blis\py.pyx -> build\lib.win-amd64-3.9\blis
copying blis\cy.pxd -> build\lib.win-amd64-3.9\blis
copying blis\__init__.pxd -> build\lib.win-amd64-3.9\blis
running build_ext
C:\Users\hudsonad\AppData\Local\Temp\1\pip-install-xwlhseua\blis_f6044dd4d07f48548964902c86472263\bin\cythonize.py:58: DeprecationWarning: distutils Version classes are deprecated. Use packaging.version instead.
if LooseVersion(cython_version) < LooseVersion('0.19'):
C:\Users\hudsonad\Anaconda3\lib\site-packages\Cython\Compiler\Main.py:369: FutureWarning: Cython directive 'language_level' not set, using 2 for now (Py2). This will change in a later release! File: C:\Users\hudsonad\AppData\Local\Temp\1\pip-install-xwlhseua\blis_f6044dd4d07f48548964902c86472263\blis\cy.pxd
tree = Parsing.p_module(s, pxd, full_module_name)
C:\Users\hudsonad\Anaconda3\lib\site-packages\Cython\Compiler\Main.py:369: FutureWarning: Cython directive 'language_level' not set, using 2 for now (Py2). This will change in a later release! File: C:\Users\hudsonad\AppData\Local\Temp\1\pip-install-xwlhseua\blis_f6044dd4d07f48548964902c86472263\blis\py.pyx
tree = Parsing.p_module(s, pxd, full_module_name)
Processing blis\cy.pyx
Processing blis\py.pyx
error: [WinError 2] The system cannot find the file specified
msvc
py_compiler msvc
{'LS_COLORS': 'rs=0:di=01;34:ln=01;36:mh=00:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:mi=00:su=37;41:sg=30;43:ca=30;41:tw=30;42:ow=34;42:st=37;44:ex=01;32:*.tar=01;31:*.tgz=01;31:*.arc=01;31:*.arj=01;31:*.taz=01;31:*.lha=01;31:*.lz4=01;31:*.lzh=01;31:*.lzma=01;31:*.tlz=01;31:*.txz=01;31:*.tzo=01;31:*.t7z=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.dz=01;31:*.gz=01;31:*.lrz=01;31:*.lz=01;31:*.lzo=01;31:*.xz=01;31:*.zst=01;31:*.tzst=01;31:*.bz2=01;31:*.bz=01;31:*.tbz=01;31:*.tbz2=01;31:*.tz=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.war=01;31:*.ear=01;31:*.sar=01;31:*.rar=01;31:*.alz=01;31:*.ace=01;31:*.zoo=01;31:*.cpio=01;31:*.7z=01;31:*.rz=01;31:*.cab=01;31:*.wim=01;31:*.swm=01;31:*.dwm=01;31:*.esd=01;31:*.jpg=01;35:*.jpeg=01;35:*.mjpg=01;35:*.mjpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.svg=01;35:*.svgz=01;35:*.mng=01;35:*.pcx=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.m2v=01;35:*.mkv=01;35:*.webm=01;35:*.ogm=01;35:*.mp4=01;35:*.m4v=01;35:*.mp4v=01;35:*.vob=01;35:*.qt=01;35:*.nuv=01;35:*.wmv=01;35:*.asf=01;35:*.rm=01;35:*.rmvb=01;35:*.flc=01;35:*.avi=01;35:*.fli=01;35:*.flv=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.yuv=01;35:*.cgm=01;35:*.emf=01;35:*.ogv=01;35:*.ogx=01;35:*.aac=00;36:*.au=00;36:*.flac=00;36:*.m4a=00;36:*.mid=00;36:*.midi=00;36:*.mka=00;36:*.mp3=00;36:*.mpc=00;36:*.ogg=00;36:*.ra=00;36:*.wav=00;36:*.oga=00;36:*.opus=00;36:*.spx=00;36:*.xspf=00;36:', 'HOSTTYPE': 'x86_64', 'LESSCLOSE': '/usr/bin/lesspipe %s %s', 'LANG': 'C.UTF-8', 'OLDPWD': '/home/matt/repos/flame-blis', 'VIRTUAL_ENV': '/home/matt/repos/cython-blis/env3.6', 'USER': 'matt', 'PWD': '/home/matt/repos/cython-blis', 'HOME': '/home/matt', 'NAME': 'LAPTOP-OMKOB3VM', 'XDG_DATA_DIRS': '/usr/local/share:/usr/share:/var/lib/snapd/desktop', 'SHELL': '/bin/bash', 'TERM': 'xterm-256color', 'SHLVL': '1', 'LOGNAME': 'matt', 'PATH': '/home/matt/repos/cython-blis/env3.6/bin:/tmp/google-cloud-sdk/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/mnt/c/Users/matt/Documents/cmder/vendor/conemu-maximus5/ConEmu/Scripts:/mnt/c/Users/matt/Documents/cmder/vendor/conemu-maximus5:/mnt/c/Users/matt/Documents/cmder/vendor/conemu-maximus5/ConEmu:/mnt/c/Python37/Scripts:/mnt/c/Python37:/mnt/c/Program Files (x86)/Intel/Intel(R) Management Engine Components/iCLS:/mnt/c/Program Files/Intel/Intel(R) Management Engine Components/iCLS:/mnt/c/Windows/System32:/mnt/c/Windows:/mnt/c/Windows/System32/wbem:/mnt/c/Windows/System32/WindowsPowerShell/v1.0:/mnt/c/Program Files (x86)/Intel/Intel(R) Management Engine Components/DAL:/mnt/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/mnt/c/Program Files (x86)/Intel/Intel(R) Management Engine Components/IPT:/mnt/c/Program Files/Intel/Intel(R) Management Engine Components/IPT:/mnt/c/Program Files/Intel/WiFi/bin:/mnt/c/Program Files/Common Files/Intel/WirelessCommon:/mnt/c/Program Files (x86)/NVIDIA Corporation/PhysX/Common:/mnt/c/ProgramData/chocolatey/bin:/mnt/c/Program Files/Git/cmd:/mnt/c/Program Files/LLVM/bin:/mnt/c/Windows/System32:/mnt/c/Windows:/mnt/c/Windows/System32/wbem:/mnt/c/Windows/System32/WindowsPowerShell/v1.0:/mnt/c/Windows/System32/OpenSSH:/mnt/c/Program Files/nodejs:/mnt/c/Users/matt/AppData/Local/Microsoft/WindowsApps:/mnt/c/Users/matt/AppData/Local/Programs/Microsoft VS Code/bin:/mnt/c/Users/matt/AppData/Roaming/npm:/snap/bin:/mnt/c/Program Files/Oracle/VirtualBox', 'PS1': '(env3.6) \\[\\e]0;\\u#\\h: \\w\\a\\]${debian_chroot:+($debian_chroot)}\\[\\033[01;32m\\]\\u#\\h\\[\\033[00m\\]:\\[\\033[01;34m\\]\\w\\[\\033[00m\\]\\$ ', 'VAGRANT_HOME': '/home/matt/.vagrant.d/', 'LESSOPEN': '| /usr/bin/lesspipe %s', '_': '/home/matt/repos/cython-blis/env3.6/bin/python'}
clang -c C:\Users\hudsonad\AppData\Local\Temp\1\pip-install-xwlhseua\blis_f6044dd4d07f48548964902c86472263\blis\_src\config\bulldozer\bli_cntx_init_bulldozer.c -o C:\Users\hudsonad\AppData\Local\Temp\1\tmp_u4panl6\bli_cntx_init_bulldozer.o -O2 -funroll-all-loops -std=c99 -D_POSIX_C_SOURCE=200112L -DBLIS_VERSION_STRING="0.5.0-6" -DBLIS_IS_BUILDING_LIBRARY -Iinclude\windows-x86_64 -I.\frame\3\ -I.\frame\ind\ukernels\ -I.\frame\1m\ -I.\frame\1f\ -I.\frame\1\ -I.\frame\include -IC:\Users\hudsonad\AppData\Local\Temp\1\pip-install-xwlhseua\blis_f6044dd4d07f48548964902c86472263\blis\_src\include\windows-x86_64
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for blis
Running setup.py clean for blis
Failed to build thinc preshed blis
Installing collected packages: wrapt, wasabi, srsly, plac, cymem, wheel, six, setuptools, preshed, numpy, murmurhash, Cython, colorama, tqdm, thinc_gpu_ops, blis, thinc
Running setup.py install for preshed: started
Running setup.py install for preshed: finished with status 'error'
error: subprocess-exited-with-error
Running setup.py install for preshed did not run successfully.
exit code: 1
[13 lines of output]
C:\Users\hudsonad\Anaconda3\lib\site-packages\setuptools\installer.py:27: SetuptoolsDeprecationWarning: setuptools.installer is deprecated. Requirements should be satisfied by a PEP 517 installer.
warnings.warn(
running install
C:\Users\hudsonad\Anaconda3\lib\site-packages\setuptools\command\install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_py
running build_ext
building 'preshed.maps' extension
"C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\bin\HostX86\x64\cl.exe" /c /nologo /O2 /W3 /GL /DNDEBUG /MD -IC:\Users\hudsonad\Anaconda3\include -IC:\Users\hudsonad\Anaconda3\include -IC:\Users\hudsonad\Anaconda3\Include "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\include" "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.33.31629\ATLMFC\include" "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Auxiliary\VS\include" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.22000.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\um" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\shared" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\winrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.22000.0\\cppwinrt" "-IC:\Program Files (x86)\Windows Kits\NETFXSDK\4.8\include\um" /EHsc /Tppreshed/maps.cpp /Fobuild\temp.win-amd64-3.9\Release\preshed/maps.obj /Ox /EHsc
maps.cpp
c1xx: fatal error C1083: Cannot open source file: 'preshed/maps.cpp': No such file or directory
error: command 'C:\\Program Files\\Microsoft Visual Studio\\2022\\Community\\VC\\Tools\\MSVC\\14.33.31629\\bin\\HostX86\\x64\\cl.exe' failed with exit code 2
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure
Encountered error while trying to install package.
preshed
note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error
I have installed MS Visual C++ build tools and I still get this error. I haven't been able to find anything about how to resolve it. Any help would be appreciated!

This is a problem with the .cpp files provided in the package .tar.gz release not being compatible with some versions of python that are newer than the package. When this package was released the most recent version of python was 3.7.
The easiest solution is to use an older version of python, in particular one where you can install everything from compiled wheels with pip rather than having to compile anything, like python 3.7.
If you really want to use python 3.9, then you can try installing directly from the github archive for each repo / version tag, which will use a newer version of cython to generate files that are compatible with python 3.9:
pip install -r cython "cymem>=2.0.2,<2.1.0"
pip install https://github.com/explosion/preshed/archive/v2.0.1.zip
You may have to repeat this for all the other requirements that have the same error: 1) install the requirements for this release (find requirements.txt in the repo at this tag), 2) pip install from the repo for this tag, either from a local clone or from this kind of archive URL.

A good starting point is to checkt the compatible python versions. If you check the pypi page, you will see python 3.6 listed as the only one, so simply use the power of conda to create an environment and install there:
conda create -n newEnv python=3.6
conda activate newEnv
pip install nlpre

When I Try To Install 'PyGObject' With pip I Get an Error

When I am trying to install PyGObject I get an error. I am using Python 3.10 and Windows Command Prompt.
C:\windows\system32>pip install PyGObject
Collecting PyGObject
Using cached PyGObject-3.42.1.tar.gz (718 kB)
Installing build dependencies ... done
Getting requirements to build wheel ... done
Preparing metadata (pyproject.toml) ... done
Requirement already satisfied: pycairo>=1.16.0 in c:\users\mona.hynes.lisdoon\appdata\local\programs\python\python310\lib\site-packages (from PyGObject) (1.21.0)
Building wheels for collected packages: PyGObject
Building wheel for PyGObject (pyproject.toml) ... error
error: subprocess-exited-with-error
× Building wheel for PyGObject (pyproject.toml) did not run successfully.
│ exit code: 1
╰─> [48 lines of output]
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-cpython-310
creating build\lib.win-amd64-cpython-310\pygtkcompat
copying pygtkcompat\generictreemodel.py -> build\lib.win-amd64-cpython-310\pygtkcompat
copying pygtkcompat\pygtkcompat.py -> build\lib.win-amd64-cpython-310\pygtkcompat
copying pygtkcompat\__init__.py -> build\lib.win-amd64-cpython-310\pygtkcompat
creating build\lib.win-amd64-cpython-310\gi
copying gi\docstring.py -> build\lib.win-amd64-cpython-310\gi
copying gi\importer.py -> build\lib.win-amd64-cpython-310\gi
copying gi\module.py -> build\lib.win-amd64-cpython-310\gi
copying gi\pygtkcompat.py -> build\lib.win-amd64-cpython-310\gi
copying gi\types.py -> build\lib.win-amd64-cpython-310\gi
copying gi\_constants.py -> build\lib.win-amd64-cpython-310\gi
copying gi\_error.py -> build\lib.win-amd64-cpython-310\gi
copying gi\_gtktemplate.py -> build\lib.win-amd64-cpython-310\gi
copying gi\_option.py -> build\lib.win-amd64-cpython-310\gi
copying gi\_ossighelper.py -> build\lib.win-amd64-cpython-310\gi
copying gi\_propertyhelper.py -> build\lib.win-amd64-cpython-310\gi
copying gi\_signalhelper.py -> build\lib.win-amd64-cpython-310\gi
copying gi\__init__.py -> build\lib.win-amd64-cpython-310\gi
creating build\lib.win-amd64-cpython-310\gi\repository
copying gi\repository\__init__.py -> build\lib.win-amd64-cpython-310\gi\repository
creating build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\Gdk.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\GdkPixbuf.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\GIMarshallingTests.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\Gio.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\GLib.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\GObject.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\Gtk.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\keysyms.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\Pango.py -> build\lib.win-amd64-cpython-310\gi\overrides
copying gi\overrides\__init__.py -> build\lib.win-amd64-cpython-310\gi\overrides
running build_ext
pycairo: new API
pycairo: trying include directory: 'C:\\Users\\mona.hynes.LISDOON\\AppData\\Local\\Temp\\pip-build-env-6iivyiiw\\overlay\\Lib\\site-packages\\cairo\\include'
pycairo: found 'C:\\Users\\mona.hynes.LISDOON\\AppData\\Local\\Temp\\pip-build-env-6iivyiiw\\overlay\\Lib\\site-packages\\cairo\\include\\py3cairo.h'
building 'gi._gi' extension
creating build\temp.win-amd64-cpython-310
creating build\temp.win-amd64-cpython-310\Release
creating build\temp.win-amd64-cpython-310\Release\gi
"C:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.31.31103\bin\HostX86\x64\cl.exe" /c /nologo /O2 /W3 /GL /DNDEBUG /MD -DPY_SSIZE_T_CLEAN -IC:\Users\mona.hynes.LISDOON\AppData\Local\Temp\pip-install-zi8f2b72\pygobject_c02dc4480e0747d4bcd87d8b59ba11df -IC:\Users\mona.hynes.LISDOON\AppData\Local\Temp\pip-install-zi8f2b72\pygobject_c02dc4480e0747d4bcd87d8b59ba11df\gi -IC:\Users\mona.hynes.LISDOON\AppData\Local\Programs\Python\Python310\include -IC:\Users\mona.hynes.LISDOON\AppData\Local\Programs\Python\Python310\Include "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.31.31103\ATLMFC\include" "-IC:\Program Files\Microsoft Visual Studio\2022\Community\VC\Tools\MSVC\14.31.31103\include" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.19041.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.19041.0\\shared" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.19041.0\\um" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.19041.0\\winrt" "-IC:\Program Files (x86)\Windows Kits\10\\include\10.0.19041.0\\cppwinrt" /Tcgi\gimodule.c /Fobuild\temp.win-amd64-cpython-310\Release\gi\gimodule.obj -FImsvc_recommended_pragmas.h
gimodule.c
gi\gimodule.c: fatal error C1083: Cannot open include file: 'msvc_recommended_pragmas.h': No such file or directory
error: command 'C:\\Program Files\\Microsoft Visual Studio\\2022\\Community\\VC\\Tools\\MSVC\\14.31.31103\\bin\\HostX86\\x64\\cl.exe' failed with exit code 2
[end of output]
note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for PyGObject
Failed to build PyGObject
ERROR: Could not build wheels for PyGObject, which is required to install pyproject.toml-based projects

I had the same issue and the problem is that PyGObject needs to be compiled which will be done by default using Microsoft Visual Studio. This seems not to work. I also read somewhere that this won't work.
I managed to compile it using the instructions on https://pygobject.readthedocs.io/en/latest/getting_started.html but then got errors importing it into my project ('circular import'). Msys2 relies on python 3.9 by default, while I'm using 3.10. Could be related. Did not have time to look further, yet. So I'm happy for solutions to that :) Maybe will try changing to 3.9. later.

Installing AIORTC via pip on Windows10

how can I install AIORTC, the WebRTC/ObjectRTC bindings for Python on windows? when I do pip install aiortc, I get the below error:
I have the lib opus source code I got from their webpage, but where can I put it? if I'm understanding the error it can't find the c headers in the include path.
any suggestions would be greatly appreciated.
C:\Users\jmh>pip install aiortc
Collecting aiortc
Downloading https://files.pythonhosted.org/packages/d3/36/33ac9464f02198e0adbfc47f8a1106c09681750646efab1994e578b08f96/aiortc-0.9.3.tar.gz (1.1MB)
100% |████████████████████████████████| 1.1MB 9.3MB/s
Collecting aioice<0.7.0,>=0.6.0 (from aiortc)
Downloading https://files.pythonhosted.org/packages/01/57/a006fbb72ea5d3d428eb1243927c864cd8df64b09db84ba12906934a87aa/aioice-0.6.4-py3-none-any.whl
Requirement already satisfied: attrs in c:\users\jmh\anaconda3\lib\site-packages (from aiortc) (17.4.0)
Collecting crcmod (from aiortc)
Downloading https://files.pythonhosted.org/packages/6b/b0/e595ce2a2527e169c3bcd6c33d2473c1918e0b7f6826a043ca1245dd4e5b/crcmod-1.7.tar.gz (89kB)
100% |████████████████████████████████| 92kB 6.2MB/s
Collecting cryptography>=2.2 (from aiortc)
Downloading https://files.pythonhosted.org/packages/9e/93/1309bdc65b757bc6318fe835ce9388a2e23e47d3eca93f5834f1d7df70bb/cryptography-2.3-cp36-cp36m-win_amd64.whl (1.3MB)
100% |████████████████████████████████| 1.3MB 7.9MB/s
Collecting pyee (from aiortc)
Downloading https://files.pythonhosted.org/packages/8e/06/10c18578e2d8b9cf9902f424f86d433c647ca55e82293100f53e6c0afab4/pyee-5.0.0-py2.py3-none-any.whl
Collecting pylibsrtp>=0.5.0 (from aiortc)
Downloading https://files.pythonhosted.org/packages/bb/6d/9dddce7658bef12d2b9625e9a1905fab12d2d7252ecffa6729080bf8dc10/pylibsrtp-0.5.5-cp36-cp36m-win_amd64.whl (48kB)
100% |████████████████████████████████| 51kB 4.2MB/s
Requirement already satisfied: pyopenssl in c:\users\jmh\anaconda3\lib\site-packages (from aiortc) (17.5.0)
Collecting netifaces (from aioice<0.7.0,>=0.6.0->aiortc)
Downloading https://files.pythonhosted.org/packages/00/ba/227e378b815a075bbda86e516e31d55430abdaa32941b72144117f7a8999/netifaces-0.10.7-cp36-cp36m-win_amd64.whl
Requirement already satisfied: cffi!=1.11.3,>=1.7 in c:\users\jmh\anaconda3\lib\site-packages (from cryptography>=2.2->aiortc) (1.11.4)
Requirement already satisfied: six>=1.4.1 in c:\users\jmh\appdata\roaming\python\python36\site-packages (from cryptography>=2.2->aiortc) (1.11.0)
Requirement already satisfied: asn1crypto>=0.21.0 in c:\users\jmh\anaconda3\lib\site-packages (from cryptography>=2.2->aiortc) (0.24.0)
Requirement already satisfied: idna>=2.1 in c:\users\jmh\anaconda3\lib\site-packages (from cryptography>=2.2->aiortc) (2.6)
Requirement already satisfied: pycparser in c:\users\jmh\anaconda3\lib\site-packages (from cffi!=1.11.3,>=1.7->cryptography>=2.2->aiortc) (2.18)
Building wheels for collected packages: aiortc, crcmod
Running setup.py bdist_wheel for aiortc ... error
Complete output from command c:\users\jmh\anaconda3\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\jmh\\AppData\\Local\\Temp\\pip-install-0twgblb0\\aiortc\\setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d C:\Users\jmh\AppData\Local\Temp\pip-wheel-7xd9rp4p --python-tag cp36:
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-3.6
creating build\lib.win-amd64-3.6\aiortc
copying aiortc\exceptions.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\jitterbuffer.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\mediastreams.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcconfiguration.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcdatachannel.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcdtlstransport.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcicetransport.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcpeerconnection.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtpparameters.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtpreceiver.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtpsender.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtptransceiver.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcsctptransport.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcsessiondescription.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtp.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\sdp.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\stats.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\utils.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\__init__.py -> build\lib.win-amd64-3.6\aiortc
creating build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\g711.py -> build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\opus.py -> build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\vpx.py -> build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\__init__.py -> build\lib.win-amd64-3.6\aiortc\codecs
running build_ext
generating cffi module 'build\\temp.win-amd64-3.6\\Release\\aiortc.codecs._vpx.c'
creating build\temp.win-amd64-3.6
creating build\temp.win-amd64-3.6\Release
generating cffi module 'build\\temp.win-amd64-3.6\\Release\\aiortc.codecs._opus.c'
building 'aiortc.codecs._opus' extension
creating build\temp.win-amd64-3.6\Release\build
creating build\temp.win-amd64-3.6\Release\build\temp.win-amd64-3.6
creating build\temp.win-amd64-3.6\Release\build\temp.win-amd64-3.6\Release
C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\VC\Tools\MSVC\14.14.26428\bin\HostX86\x64\cl.exe /c /nologo /Ox /W3 /GL /DNDEBUG /MD -Ic:\users\jmh\anaconda3\include -Ic:\users\jmh\anaconda3\include "-IC:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\VC\Tools\MSVC\14.14.26428\ATLMFC\include" "-IC:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\VC\Tools\MSVC\14.14.26428\include" "-IC:\Program Files (x86)\Windows Kits\NETFXSDK\4.6.1\include\um" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\shared" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\um" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\winrt" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\cppwinrt" /Tcbuild\temp.win-amd64-3.6\Release\aiortc.codecs._opus.c /Fobuild\temp.win-amd64-3.6\Release\build\temp.win-amd64-3.6\Release\aiortc.codecs._opus.obj
aiortc.codecs._opus.c
build\temp.win-amd64-3.6\Release\aiortc.codecs._opus.c(493): fatal error C1083: Cannot open include file: 'opus/opus.h': No such file or directory
error: command 'C:\\Program Files (x86)\\Microsoft Visual Studio\\2017\\Professional\\VC\\Tools\\MSVC\\14.14.26428\\bin\\HostX86\\x64\\cl.exe' failed with exit status 2
----------------------------------------
Failed building wheel for aiortc
Running setup.py clean for aiortc
Running setup.py bdist_wheel for crcmod ... done
Stored in directory: C:\Users\jmh\AppData\Local\pip\Cache\wheels\50\24\4d\4580ca4a299f1ad6fd63443e6e584cb21e9a07988e4aa8daac
Successfully built crcmod
Failed to build aiortc
Installing collected packages: netifaces, aioice, crcmod, cryptography, pyee, pylibsrtp, aiortc
Found existing installation: cryptography 2.1.4
Uninstalling cryptography-2.1.4:
Successfully uninstalled cryptography-2.1.4
Running setup.py install for aiortc ... error
Complete output from command c:\users\jmh\anaconda3\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\jmh\\AppData\\Local\\Temp\\pip-install-0twgblb0\\aiortc\\setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record C:\Users\jmh\AppData\Local\Temp\pip-record-9v5v3hnf\install-record.txt --single-version-externally-managed --compile:
running install
running build
running build_py
creating build
creating build\lib.win-amd64-3.6
creating build\lib.win-amd64-3.6\aiortc
copying aiortc\exceptions.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\jitterbuffer.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\mediastreams.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcconfiguration.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcdatachannel.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcdtlstransport.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcicetransport.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcpeerconnection.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtpparameters.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtpreceiver.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtpsender.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcrtptransceiver.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcsctptransport.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtcsessiondescription.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\rtp.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\sdp.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\stats.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\utils.py -> build\lib.win-amd64-3.6\aiortc
copying aiortc\__init__.py -> build\lib.win-amd64-3.6\aiortc
creating build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\g711.py -> build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\opus.py -> build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\vpx.py -> build\lib.win-amd64-3.6\aiortc\codecs
copying aiortc\codecs\__init__.py -> build\lib.win-amd64-3.6\aiortc\codecs
running build_ext
generating cffi module 'build\\temp.win-amd64-3.6\\Release\\aiortc.codecs._vpx.c'
creating build\temp.win-amd64-3.6
creating build\temp.win-amd64-3.6\Release
generating cffi module 'build\\temp.win-amd64-3.6\\Release\\aiortc.codecs._opus.c'
building 'aiortc.codecs._opus' extension
creating build\temp.win-amd64-3.6\Release\build
creating build\temp.win-amd64-3.6\Release\build\temp.win-amd64-3.6
creating build\temp.win-amd64-3.6\Release\build\temp.win-amd64-3.6\Release
C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\VC\Tools\MSVC\14.14.26428\bin\HostX86\x64\cl.exe /c /nologo /Ox /W3 /GL /DNDEBUG /MD -Ic:\users\jmh\anaconda3\include -Ic:\users\jmh\anaconda3\include "-IC:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\VC\Tools\MSVC\14.14.26428\ATLMFC\include" "-IC:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\VC\Tools\MSVC\14.14.26428\include" "-IC:\Program Files (x86)\Windows Kits\NETFXSDK\4.6.1\include\um" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\shared" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\um" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\winrt" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.17134.0\cppwinrt" /Tcbuild\temp.win-amd64-3.6\Release\aiortc.codecs._opus.c /Fobuild\temp.win-amd64-3.6\Release\build\temp.win-amd64-3.6\Release\aiortc.codecs._opus.obj
aiortc.codecs._opus.c
build\temp.win-amd64-3.6\Release\aiortc.codecs._opus.c(493): fatal error C1083: Cannot open include file: 'opus/opus.h': No such file or directory
error: command 'C:\\Program Files (x86)\\Microsoft Visual Studio\\2017\\Professional\\VC\\Tools\\MSVC\\14.14.26428\\bin\\HostX86\\x64\\cl.exe' failed with exit status 2
----------------------------------------
Command "c:\users\jmh\anaconda3\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\jmh\\AppData\\Local\\Temp\\pip-install-0twgblb0\\aiortc\\setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record C:\Users\jmh\AppData\Local\Temp\pip-record-9v5v3hnf\install-record.txt --single-version-externally-managed --compile" failed with error code 1 in C:\Users\jmh\AppData\Local\Temp\pip-install-0twgblb0\aiortc\
C:\Users\jmh>

According to the github page of AIORTC, Windows 10 isn't supported at this time.
It is supported on Linux. Maybe try it out with virtualbox or WSL?

installing Gdal on Windows 10 with python 3.6.4: fatal error C1083: Cannot open include file: 'cpl_port.h'

So I am trying to pip install gdal but got an error.
extensions/gdal_wrap.cpp(3168): fatal error C1083: Cannot open include file: 'cpl_port.h': No such file or directory
error: command 'C:\\Program Files (x86)\\Microsoft Visual Studio\\2017\\BuildTools\\VC\\Tools\\MSVC\\14.13.26128\\bin\\HostX86\\x64\\cl.exe' failed with exit status 2
So I am running the following:
Python 3.6.4 anaconda distribution
Windows 10 (x64)
Microsoft Visual 2017 Redistribute both x64 and x86 (both installed by the vs builder tool)
MS Visual was installed because of this error before
error: Microsoft Visual C++ 14.0 is required. Get it with "Microsoft Visual C++ Build Tools": http://landinghub.visualstudio.com/visual-cpp-build-tools
Here is the trace log for the error:
C:\Users\0\Desktop\>pip install gdal
Collecting gdal
Using cached GDAL-2.2.4.tar.gz
Building wheels for collected packages: gdal
Running setup.py bdist_wheel for gdal ... error
Complete output from command c:\users\0\envs\ecoscan\scripts\python.exe -u -c "import setuptools, tokenize;__file__='C:\\Users\\0\\AppData\\Local\\Temp\\pip-build-wc3za_f8\\gdal\\setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d C:\Users\0\AppData\Local\Temp\tmp9t7nk1ompip-wheel- --python-tag cp36:
running bdist_wheel
running build
running build_py
creating build
creating build\lib.win-amd64-3.6
copying gdal.py -> build\lib.win-amd64-3.6
copying ogr.py -> build\lib.win-amd64-3.6
copying osr.py -> build\lib.win-amd64-3.6
copying gdalconst.py -> build\lib.win-amd64-3.6
copying gnm.py -> build\lib.win-amd64-3.6
creating build\lib.win-amd64-3.6\osgeo
copying osgeo\gdal.py -> build\lib.win-amd64-3.6\osgeo
copying osgeo\gdalconst.py -> build\lib.win-amd64-3.6\osgeo
copying osgeo\gdalnumeric.py -> build\lib.win-amd64-3.6\osgeo
copying osgeo\gdal_array.py -> build\lib.win-amd64-3.6\osgeo
copying osgeo\gnm.py -> build\lib.win-amd64-3.6\osgeo
copying osgeo\ogr.py -> build\lib.win-amd64-3.6\osgeo
copying osgeo\osr.py -> build\lib.win-amd64-3.6\osgeo
copying osgeo\__init__.py -> build\lib.win-amd64-3.6\osgeo
Fixing build\lib.win-amd64-3.6\gdal.py build\lib.win-amd64-3.6\ogr.py build\lib.win-amd64-3.6\osr.py build\lib.win-amd64-3.6\gdalconst.py build\lib.win-amd64-3.6\gnm.py build\lib.win-amd64-3.6\osgeo\gdal.py build\lib.win-amd64-3.6\osgeo\gdalconst.py build\lib.win-amd64-3.6\osgeo\gdalnumeric.py build\lib.win-amd64-3.6\osgeo\gdal_array.py build\lib.win-amd64-3.6\osgeo\gnm.py build\lib.win-amd64-3.6\osgeo\ogr.py build\lib.win-amd64-3.6\osgeo\osr.py build\lib.win-amd64-3.6\osgeo\__init__.py
Skipping optional fixer: ws_comma
Fixing build\lib.win-amd64-3.6\gdal.py build\lib.win-amd64-3.6\ogr.py build\lib.win-amd64-3.6\osr.py build\lib.win-amd64-3.6\gdalconst.py build\lib.win-amd64-3.6\gnm.py build\lib.win-amd64-3.6\osgeo\gdal.py build\lib.win-amd64-3.6\osgeo\gdalconst.py build\lib.win-amd64-3.6\osgeo\gdalnumeric.py build\lib.win-amd64-3.6\osgeo\gdal_array.py build\lib.win-amd64-3.6\osgeo\gnm.py build\lib.win-amd64-3.6\osgeo\ogr.py build\lib.win-amd64-3.6\osgeo\osr.py build\lib.win-amd64-3.6\osgeo\__init__.py
Skipping optional fixer: ws_comma
running build_ext
building 'osgeo._gdal' extension
creating build\temp.win-amd64-3.6
creating build\temp.win-amd64-3.6\Release
creating build\temp.win-amd64-3.6\Release\extensions
C:\Program Files (x86)\Microsoft Visual Studio\2017\BuildTools\VC\Tools\MSVC\14.13.26128\bin\HostX86\x64\cl.exe /c /nologo /Ox /W3 /GL /DNDEBUG /MD -I../../port -I../../gcore -I../../alg -I../../ogr/ -I../../ogr/ogrsf_frmts -I../../gnm -I../../apps -Ic:\users\0\anaconda3\include -Ic:\users\0\anaconda3\include -I. "-IC:\Program Files (x86)\Microsoft Visual Studio\2017\BuildTools\VC\Tools\MSVC\14.13.26128\include" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.16299.0\ucrt" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.16299.0\shared" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.16299.0\um" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.16299.0\winrt" "-IC:\Program Files (x86)\Windows Kits\10\include\10.0.16299.0\cppwinrt" /EHsc /Tpextensions/gdal_wrap.cpp /Fobuild\temp.win-amd64-3.6\Release\extensions/gdal_wrap.obj
gdal_wrap.cpp
extensions/gdal_wrap.cpp(3168): fatal error C1083: Cannot open include file: 'cpl_port.h': No such file or directory
error: command 'C:\\Program Files (x86)\\Microsoft Visual Studio\\2017\\BuildTools\\VC\\Tools\\MSVC\\14.13.26128\\bin\\HostX86\\x64\\cl.exe' failed with exit status 2
Any ideas how to fix this? I just want use the ogr2ogr in gdal to convert .shp to GeoJSON then to topojson.

I had the same problem and found the solution here:
gdal-installation-error-using-pip
That is: download the wheel file and install from the command line.

I prefer use conda instead, I was stuck at the same issue for hours, this is the only solution to install GDAL I found.
conda install gdal

Categories

Resources