Internal Server Error while executing a flask module [duplicate] - python

How are you meant to debug errors in Flask? Print to the console? Flash messages to the page? Or is there a more powerful option available to figure out what's happening when something goes wrong?

Running the app in debug mode will show an interactive traceback and console in the browser when there is an error. As of Flask 2.2, to run in debug mode, pass the --app and --debug options to the flask command.
$ flask --app example --debug run
Prior to Flask 2.2, this was controlled by the FLASK_ENV=development environment variable instead. You can still use FLASK_APP and FLASK_DEBUG=1 instead of the options above.
For Linux, Mac, Linux Subsystem for Windows, Git Bash on Windows, etc.:
$ export FLASK_APP=example
$ export FLASK_DEBUG=1
$ flask run
For Windows CMD, use set instead of export:
set FLASK_DEBUG=1
For PowerShell, use $env:
$env:FLASK_DEBUG = "1"
If you're using the app.run() method instead of the flask run command, pass debug=True to enable debug mode.
Tracebacks are also printed to the terminal running the server, regardless of development mode.
If you're using PyCharm, VS Code, etc., you can take advantage of its debugger to step through the code with breakpoints. The run configuration can point to a script calling app.run(debug=True, use_reloader=False), or point it at the venv/bin/flask script and use it as you would from the command line. You can leave the reloader disabled, but a reload will kill the debugging context and you will have to catch a breakpoint again.
You can also use pdb, pudb, or another terminal debugger by calling set_trace in the view where you want to start debugging.
Be sure not to use too-broad except blocks. Surrounding all your code with a catch-all try... except... will silence the error you want to debug. It's unnecessary in general, since Flask will already handle exceptions by showing the debugger or a 500 error and printing the traceback to the console.

You can use app.run(debug=True) for the Werkzeug Debugger edit as mentioned below, and I should have known.

From the 1.1.x documentation, you can enable debug mode by exporting an environment variable to your shell prompt:
export FLASK_APP=/daemon/api/views.py # path to app
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0

One can also use the Flask Debug Toolbar extension to get more detailed information embedded in rendered pages.
from flask import Flask
from flask_debugtoolbar import DebugToolbarExtension
import logging
app = Flask(__name__)
app.debug = True
app.secret_key = 'development key'
toolbar = DebugToolbarExtension(app)
#app.route('/')
def index():
logging.warning("See this message in Flask Debug Toolbar!")
return "<html><body></body></html>"
Start the application as follows:
FLASK_APP=main.py FLASK_DEBUG=1 flask run

If you're using Visual Studio Code, replace
app.run(debug=True)
with
app.run()
It appears when turning on the internal debugger disables the VS Code debugger.

If you want to debug your flask app then just go to the folder where flask app is. Don't forget to activate your virtual environment and paste the lines in the console change "mainfilename" to flask main file.
export FLASK_APP="mainfilename.py"
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0
After you enable your debugger for flask app almost every error will be printed on the console or on the browser window.
If you want to figure out what's happening, you can use simple print statements or you can also use console.log() for javascript code.

To activate debug mode in flask you simply type set FLASK_DEBUG=1 on your CMD for windows, or export FLASK_DEBUG=1 on Linux terminal then restart your app and you are good to go!!

Install python-dotenv in your virtual environment.
Create a .flaskenv in your project root. By project root, I mean the folder which has your app.py file
Inside this file write the following:
FLASK_APP=myapp
FLASK_ENV=development
Now issue the following command:
flask run

When running as python app.py instead of the flask command, you can pass debug=True to app.run.
if __name__ == "__main__":
app.run(debug=True)
$ python app.py

with virtual env activate
export FLASK_DEBUG=true
you can configure
export FLASK_APP=app.py # run.py
export FLASK_ENV = "development"
to start
flask run
the result
* Environment: development
* Debug mode: on
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
* Restarting with stat
* Debugger is active!
* Debugger PIN: xxx-xxx-xxx
and if you change
export FLASK_DEBUG=false
* Environment: development
* Debug mode: off
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)

For Windows users:
Open Powershell and cd into your project directory.
Use these commandos in Powershell, all the other stuff won't work in Powershell.
$env:FLASK_APP = "app"
$env:FLASK_ENV = "development"

If you have PyCharm Professional, you can create a Flask server run configuration and enable the FLASK_DEBUG checkbox. Go to Run > Edit Configurations, select or create a Flask server configuration, and enable the FLASK_DEBUG checkbox. Click OK, then click the run button.

You can install python-dotenv with
pip install python-dotenv then create a .flask_env or a .env file
The contents of the file can be:
FLASK_APP=myapp
FLASK_DEBUG=True

Use loggers and print statements in the Development Environment, you can go for sentry in case of production environments.

Related

Python win32api.MessageBox and Tk are not showing up when python program activated by IIS [duplicate]

How are you meant to debug errors in Flask? Print to the console? Flash messages to the page? Or is there a more powerful option available to figure out what's happening when something goes wrong?
Running the app in debug mode will show an interactive traceback and console in the browser when there is an error. As of Flask 2.2, to run in debug mode, pass the --app and --debug options to the flask command.
$ flask --app example --debug run
Prior to Flask 2.2, this was controlled by the FLASK_ENV=development environment variable instead. You can still use FLASK_APP and FLASK_DEBUG=1 instead of the options above.
For Linux, Mac, Linux Subsystem for Windows, Git Bash on Windows, etc.:
$ export FLASK_APP=example
$ export FLASK_DEBUG=1
$ flask run
For Windows CMD, use set instead of export:
set FLASK_DEBUG=1
For PowerShell, use $env:
$env:FLASK_DEBUG = "1"
If you're using the app.run() method instead of the flask run command, pass debug=True to enable debug mode.
Tracebacks are also printed to the terminal running the server, regardless of development mode.
If you're using PyCharm, VS Code, etc., you can take advantage of its debugger to step through the code with breakpoints. The run configuration can point to a script calling app.run(debug=True, use_reloader=False), or point it at the venv/bin/flask script and use it as you would from the command line. You can leave the reloader disabled, but a reload will kill the debugging context and you will have to catch a breakpoint again.
You can also use pdb, pudb, or another terminal debugger by calling set_trace in the view where you want to start debugging.
Be sure not to use too-broad except blocks. Surrounding all your code with a catch-all try... except... will silence the error you want to debug. It's unnecessary in general, since Flask will already handle exceptions by showing the debugger or a 500 error and printing the traceback to the console.
You can use app.run(debug=True) for the Werkzeug Debugger edit as mentioned below, and I should have known.
From the 1.1.x documentation, you can enable debug mode by exporting an environment variable to your shell prompt:
export FLASK_APP=/daemon/api/views.py # path to app
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0
One can also use the Flask Debug Toolbar extension to get more detailed information embedded in rendered pages.
from flask import Flask
from flask_debugtoolbar import DebugToolbarExtension
import logging
app = Flask(__name__)
app.debug = True
app.secret_key = 'development key'
toolbar = DebugToolbarExtension(app)
#app.route('/')
def index():
logging.warning("See this message in Flask Debug Toolbar!")
return "<html><body></body></html>"
Start the application as follows:
FLASK_APP=main.py FLASK_DEBUG=1 flask run
If you're using Visual Studio Code, replace
app.run(debug=True)
with
app.run()
It appears when turning on the internal debugger disables the VS Code debugger.
If you want to debug your flask app then just go to the folder where flask app is. Don't forget to activate your virtual environment and paste the lines in the console change "mainfilename" to flask main file.
export FLASK_APP="mainfilename.py"
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0
After you enable your debugger for flask app almost every error will be printed on the console or on the browser window.
If you want to figure out what's happening, you can use simple print statements or you can also use console.log() for javascript code.
To activate debug mode in flask you simply type set FLASK_DEBUG=1 on your CMD for windows, or export FLASK_DEBUG=1 on Linux terminal then restart your app and you are good to go!!
Install python-dotenv in your virtual environment.
Create a .flaskenv in your project root. By project root, I mean the folder which has your app.py file
Inside this file write the following:
FLASK_APP=myapp
FLASK_ENV=development
Now issue the following command:
flask run
When running as python app.py instead of the flask command, you can pass debug=True to app.run.
if __name__ == "__main__":
app.run(debug=True)
$ python app.py
with virtual env activate
export FLASK_DEBUG=true
you can configure
export FLASK_APP=app.py # run.py
export FLASK_ENV = "development"
to start
flask run
the result
* Environment: development
* Debug mode: on
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
* Restarting with stat
* Debugger is active!
* Debugger PIN: xxx-xxx-xxx
and if you change
export FLASK_DEBUG=false
* Environment: development
* Debug mode: off
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
For Windows users:
Open Powershell and cd into your project directory.
Use these commandos in Powershell, all the other stuff won't work in Powershell.
$env:FLASK_APP = "app"
$env:FLASK_ENV = "development"
If you have PyCharm Professional, you can create a Flask server run configuration and enable the FLASK_DEBUG checkbox. Go to Run > Edit Configurations, select or create a Flask server configuration, and enable the FLASK_DEBUG checkbox. Click OK, then click the run button.
You can install python-dotenv with
pip install python-dotenv then create a .flask_env or a .env file
The contents of the file can be:
FLASK_APP=myapp
FLASK_DEBUG=True
Use loggers and print statements in the Development Environment, you can go for sentry in case of production environments.

What do I change or add when receiving Internal Server error? [duplicate]

How are you meant to debug errors in Flask? Print to the console? Flash messages to the page? Or is there a more powerful option available to figure out what's happening when something goes wrong?
Running the app in debug mode will show an interactive traceback and console in the browser when there is an error. As of Flask 2.2, to run in debug mode, pass the --app and --debug options to the flask command.
$ flask --app example --debug run
Prior to Flask 2.2, this was controlled by the FLASK_ENV=development environment variable instead. You can still use FLASK_APP and FLASK_DEBUG=1 instead of the options above.
For Linux, Mac, Linux Subsystem for Windows, Git Bash on Windows, etc.:
$ export FLASK_APP=example
$ export FLASK_DEBUG=1
$ flask run
For Windows CMD, use set instead of export:
set FLASK_DEBUG=1
For PowerShell, use $env:
$env:FLASK_DEBUG = "1"
If you're using the app.run() method instead of the flask run command, pass debug=True to enable debug mode.
Tracebacks are also printed to the terminal running the server, regardless of development mode.
If you're using PyCharm, VS Code, etc., you can take advantage of its debugger to step through the code with breakpoints. The run configuration can point to a script calling app.run(debug=True, use_reloader=False), or point it at the venv/bin/flask script and use it as you would from the command line. You can leave the reloader disabled, but a reload will kill the debugging context and you will have to catch a breakpoint again.
You can also use pdb, pudb, or another terminal debugger by calling set_trace in the view where you want to start debugging.
Be sure not to use too-broad except blocks. Surrounding all your code with a catch-all try... except... will silence the error you want to debug. It's unnecessary in general, since Flask will already handle exceptions by showing the debugger or a 500 error and printing the traceback to the console.
You can use app.run(debug=True) for the Werkzeug Debugger edit as mentioned below, and I should have known.
From the 1.1.x documentation, you can enable debug mode by exporting an environment variable to your shell prompt:
export FLASK_APP=/daemon/api/views.py # path to app
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0
One can also use the Flask Debug Toolbar extension to get more detailed information embedded in rendered pages.
from flask import Flask
from flask_debugtoolbar import DebugToolbarExtension
import logging
app = Flask(__name__)
app.debug = True
app.secret_key = 'development key'
toolbar = DebugToolbarExtension(app)
#app.route('/')
def index():
logging.warning("See this message in Flask Debug Toolbar!")
return "<html><body></body></html>"
Start the application as follows:
FLASK_APP=main.py FLASK_DEBUG=1 flask run
If you're using Visual Studio Code, replace
app.run(debug=True)
with
app.run()
It appears when turning on the internal debugger disables the VS Code debugger.
If you want to debug your flask app then just go to the folder where flask app is. Don't forget to activate your virtual environment and paste the lines in the console change "mainfilename" to flask main file.
export FLASK_APP="mainfilename.py"
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0
After you enable your debugger for flask app almost every error will be printed on the console or on the browser window.
If you want to figure out what's happening, you can use simple print statements or you can also use console.log() for javascript code.
To activate debug mode in flask you simply type set FLASK_DEBUG=1 on your CMD for windows, or export FLASK_DEBUG=1 on Linux terminal then restart your app and you are good to go!!
Install python-dotenv in your virtual environment.
Create a .flaskenv in your project root. By project root, I mean the folder which has your app.py file
Inside this file write the following:
FLASK_APP=myapp
FLASK_ENV=development
Now issue the following command:
flask run
When running as python app.py instead of the flask command, you can pass debug=True to app.run.
if __name__ == "__main__":
app.run(debug=True)
$ python app.py
with virtual env activate
export FLASK_DEBUG=true
you can configure
export FLASK_APP=app.py # run.py
export FLASK_ENV = "development"
to start
flask run
the result
* Environment: development
* Debug mode: on
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
* Restarting with stat
* Debugger is active!
* Debugger PIN: xxx-xxx-xxx
and if you change
export FLASK_DEBUG=false
* Environment: development
* Debug mode: off
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
For Windows users:
Open Powershell and cd into your project directory.
Use these commandos in Powershell, all the other stuff won't work in Powershell.
$env:FLASK_APP = "app"
$env:FLASK_ENV = "development"
If you have PyCharm Professional, you can create a Flask server run configuration and enable the FLASK_DEBUG checkbox. Go to Run > Edit Configurations, select or create a Flask server configuration, and enable the FLASK_DEBUG checkbox. Click OK, then click the run button.
You can install python-dotenv with
pip install python-dotenv then create a .flask_env or a .env file
The contents of the file can be:
FLASK_APP=myapp
FLASK_DEBUG=True
Use loggers and print statements in the Development Environment, you can go for sentry in case of production environments.

Make flask run honor app.debug [duplicate]

How are you meant to debug errors in Flask? Print to the console? Flash messages to the page? Or is there a more powerful option available to figure out what's happening when something goes wrong?
Running the app in debug mode will show an interactive traceback and console in the browser when there is an error. As of Flask 2.2, to run in debug mode, pass the --app and --debug options to the flask command.
$ flask --app example --debug run
Prior to Flask 2.2, this was controlled by the FLASK_ENV=development environment variable instead. You can still use FLASK_APP and FLASK_DEBUG=1 instead of the options above.
For Linux, Mac, Linux Subsystem for Windows, Git Bash on Windows, etc.:
$ export FLASK_APP=example
$ export FLASK_DEBUG=1
$ flask run
For Windows CMD, use set instead of export:
set FLASK_DEBUG=1
For PowerShell, use $env:
$env:FLASK_DEBUG = "1"
If you're using the app.run() method instead of the flask run command, pass debug=True to enable debug mode.
Tracebacks are also printed to the terminal running the server, regardless of development mode.
If you're using PyCharm, VS Code, etc., you can take advantage of its debugger to step through the code with breakpoints. The run configuration can point to a script calling app.run(debug=True, use_reloader=False), or point it at the venv/bin/flask script and use it as you would from the command line. You can leave the reloader disabled, but a reload will kill the debugging context and you will have to catch a breakpoint again.
You can also use pdb, pudb, or another terminal debugger by calling set_trace in the view where you want to start debugging.
Be sure not to use too-broad except blocks. Surrounding all your code with a catch-all try... except... will silence the error you want to debug. It's unnecessary in general, since Flask will already handle exceptions by showing the debugger or a 500 error and printing the traceback to the console.
You can use app.run(debug=True) for the Werkzeug Debugger edit as mentioned below, and I should have known.
From the 1.1.x documentation, you can enable debug mode by exporting an environment variable to your shell prompt:
export FLASK_APP=/daemon/api/views.py # path to app
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0
One can also use the Flask Debug Toolbar extension to get more detailed information embedded in rendered pages.
from flask import Flask
from flask_debugtoolbar import DebugToolbarExtension
import logging
app = Flask(__name__)
app.debug = True
app.secret_key = 'development key'
toolbar = DebugToolbarExtension(app)
#app.route('/')
def index():
logging.warning("See this message in Flask Debug Toolbar!")
return "<html><body></body></html>"
Start the application as follows:
FLASK_APP=main.py FLASK_DEBUG=1 flask run
If you're using Visual Studio Code, replace
app.run(debug=True)
with
app.run()
It appears when turning on the internal debugger disables the VS Code debugger.
If you want to debug your flask app then just go to the folder where flask app is. Don't forget to activate your virtual environment and paste the lines in the console change "mainfilename" to flask main file.
export FLASK_APP="mainfilename.py"
export FLASK_DEBUG=1
python -m flask run --host=0.0.0.0
After you enable your debugger for flask app almost every error will be printed on the console or on the browser window.
If you want to figure out what's happening, you can use simple print statements or you can also use console.log() for javascript code.
To activate debug mode in flask you simply type set FLASK_DEBUG=1 on your CMD for windows, or export FLASK_DEBUG=1 on Linux terminal then restart your app and you are good to go!!
Install python-dotenv in your virtual environment.
Create a .flaskenv in your project root. By project root, I mean the folder which has your app.py file
Inside this file write the following:
FLASK_APP=myapp
FLASK_ENV=development
Now issue the following command:
flask run
When running as python app.py instead of the flask command, you can pass debug=True to app.run.
if __name__ == "__main__":
app.run(debug=True)
$ python app.py
with virtual env activate
export FLASK_DEBUG=true
you can configure
export FLASK_APP=app.py # run.py
export FLASK_ENV = "development"
to start
flask run
the result
* Environment: development
* Debug mode: on
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
* Restarting with stat
* Debugger is active!
* Debugger PIN: xxx-xxx-xxx
and if you change
export FLASK_DEBUG=false
* Environment: development
* Debug mode: off
* Running on http://127.0.0.1:5000/ (Press CTRL+C to quit)
For Windows users:
Open Powershell and cd into your project directory.
Use these commandos in Powershell, all the other stuff won't work in Powershell.
$env:FLASK_APP = "app"
$env:FLASK_ENV = "development"
If you have PyCharm Professional, you can create a Flask server run configuration and enable the FLASK_DEBUG checkbox. Go to Run > Edit Configurations, select or create a Flask server configuration, and enable the FLASK_DEBUG checkbox. Click OK, then click the run button.
You can install python-dotenv with
pip install python-dotenv then create a .flask_env or a .env file
The contents of the file can be:
FLASK_APP=myapp
FLASK_DEBUG=True
Use loggers and print statements in the Development Environment, you can go for sentry in case of production environments.

Warning message while running Flask

While I am running Flask code from my command line, a warning is appearing:
Serving Flask app "hello_flask" (lazy loading)
* Environment: production
WARNING: Do not use the development server in a production environment.
Use a production WSGI server instead.
What does this mean?
As stated in the Flask documentation:
While lightweight and easy to use, Flask’s built-in server is not suitable for production as it doesn’t scale well and by default serves only one request at a time.
Given that a web application is expected to handle multiple concurrent requests from multiple users, Flask is warning you that the development server will not do this (by default). It recommends using a Web Server Gateway Interface (WSGI) server (numerous possibilities are listed in the deployment docs with further instructions for each) that will function as your web/application server and call Flask as it serves requests.
Try gevent:
from flask import Flask
from gevent.pywsgi import WSGIServer
app = Flask(__name__)
#app.route('/api', methods=['GET'])
def index():
return "Hello, World!"
if __name__ == '__main__':
# Debug/Development
# app.run(debug=True, host="0.0.0.0", port="5000")
# Production
http_server = WSGIServer(('', 5000), app)
http_server.serve_forever()
Note: Install gevent using pip install gevent
As of Flask 1.x, the default environment is set to production.
To use the development environment, create a file called .flaskenv and save it in the top-level (root) of your project directory. Set the FLASK_ENV=development in the .flaskenv file. You can also save the FLASK_APP=myapp.py.
Example:
myproject/.flaskenv:
FLASK_APP=myapp.py
FLASK_ENV=development
Then you just execute this on the command line:
flask run
That should take care of the warning.
To remove the "Do not use the development server in a production environment." warning, run:
export FLASK_ENV=development
before flask run.
I was typing flask run and then saw this message after that I solve this issue with these:
1- Add this text in your myproject/.flaskenv :
FLASK_APP=myapp.py
FLASK_ENV=development
also you should type "pip3 install python-dotenv" for using this file .flaskenv
2-in your project folder type in terminal your flask command which one you use :
flask-3 run
First, try to the following :
set FLASK_ENV=development
then run your app.
I have been using flask for quite some time now, and today, suddenly this warning turned up. I found this.
As mentioned here, as of flask version 1.0 the environment in which a flask app runs is by default set to production. If you run your app in an older flask version, you won't be seeing this warning.
New in version 1.0.
Changelog
The environment in which the Flask app runs is set by the FLASK_ENV environment variable. If not set it defaults to production. The other recognized environment is development. Flask and extensions may choose to enable behaviors based on the environment.
in configurations or config you can add this code :
ENV = ""
same as if you try to add debug set to true like this
DEBUG = True
for more detail you can check this http://flask.pocoo.org/docs/1.0/config/#ENV
It means the programe is run on production mode even in developing environment.so to avoid that warning, you need to define this is development environment.for that,Type and run below command in project directory on terminal(linux).
export FLASK_ENV=development
if you are windows user then run,
set FLASK_ENV=development
To disable the message I use:
app.env = "development"
You have to put this in the Python-Script before you run the app with:
app.run(host="localhost")
If you encounter NoAppException and you see lazy loading the following seemed to fix the issue:
cd <project directory>
export FLASK_APP=.
export FLASK_ENV=development
export FLASK_DEBUG=1
You can begin your main script like this :
import os
if __name__ == '__main__':
os.environ.setdefault('FLASK_ENV', 'development')

flask.cli.NoAppException: The file/path provided (new_app.py) does not appear to exist

I keep getting this error flask.cli.NoAppException: The file/path provided (new_app.py) does not appear to exist. Please verify the path is correct. If app is not on PYTHONPATH, ensure the extension is .py it goes away after I restart the Flask server.
I am running flask run in the correct directory where my app is. This just started happening after working for 2 weeks. I've read that it could be due to an import error, but I am not finding any modules that are not installed on my virutalenv.
from flask import Flask
app = Flask(__name__)
app.debug=True
Most likely you haven't set the FLASK_APP environment variable.
To run the application you can either use the flask command or
python’s -m switch with Flask. Before you can do that you need to tell
your terminal the application to work with by exporting the FLASK_APP
environment variable:
$ export FLASK_APP=hello.py
$ flask run * Running on http://127.0.0.1:5000/
If you are on Windows you need to use set
instead of export.
Alternatively you can use python -m flask:
$ export FLASK_APP=hello.py
$ python -m flask run * Running on http://127.0.0.1:5000/
EDIT
If you have FLASK_APP set then try adding this to new_app.py
app.run(debug=True, port=8800)
Or if you're on Windows:
if __name__ == '__main__':
app.run(debug=True, port=8800)
And then just execute the app with python new_app.py.

Categories

Resources