I want to switch over to VS Code. I did the following to enable python with the packages I typically use, including a local utilities package on this machine:
Searched for the setting python.pythonPath and made it PycharmProjects/Project/venv/Scripts/python.exe for both this workspace and for my user
Changed my Windows user PYTHONPATH to PycharmProjects/Project/venv/Scripts/python.exe
Tried PycharmProjects/python.exe;local-utilities-directory
However, the folder I'm trying to manually set won't show up as a possible option when I click on my interpreter in the bottom right. Instead I'm defaulting to an older interpreter that doesn't have all the packages I've amassed.
While I can access some packages, while trying to pull in my personal utilities library, pip fails (the term pip is not recognized...)
I see that there are a few other ways to change the python path, however, to my understanding, whether you do it in a .json or via the IDE UI, shouldn't actually matter.
Any help would be appreciated.
So, I think I messed things up by offering too many paths.
I had to double check that the exact same path showed up first in:
Work setting pythonPath
User setting pythonPath
Windows profile path
Windows profile PYTHONPATH
I deleted the other "backup" paths, and it ended up working.
I changed the windows10 username and now python is not working anymore.
The person who previously worked on this machine created the user-profile with a space within the name (C:\Users\His Name...). This ocassionally caused Problems because some programs can't seem to handle spaces in a path. So I changed this to "C:\Users\HisName..." like this:
Created a new temporary account.
Loged into that new account.
Used netplwiz to change the original accounts name.
Changed the path in Windows explorer to match the new name.
Changed the registry entry "ProfileImagePath" at "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows
NT\CurrentVersion\ProfileList" to the new username.
Source: https://ekiwi-blog.de/Windows/Windows_10_Tipps/Benutzernamen_und_Verzeichnis_aendern/index.html
(Sorry, its german)
When I execute "python" in CMD-line it says the command was not found.
Also IDLE doesn't start anymore and Visual Studio Code can't run python scripts. It seems like it can't access the extensions.
I checked PATH in the enviromental Parameters and there were still the old Paths. But changing them to the new ones didn't make a difference.
What can I do to make python work again?
This might be because Python wasn't install for all the users.
You could check if the Python executable is located in the user's home directory. The location of the home directory is retrieved by using the os.path.expanduser() method. The location of the Python interpreter is retrieved by using the sys.executable() method.
The following function returns True if the Python interpreter was installed within the user's home directory, and False otherwise. It works under Linux, and should work under macOS and Windows (but I didn't test those).
import sys
import os
def user_python():
try:
return sys.executable.startswith(os.path.expanduser("~"))
except AttributeError:
return False
If you want the directory accessible by everyone, you should put it in a directory everyone has access to, such as C:\Python3.6, rather that under a Users directory. During the Python installation, you are given the options of who you want to install it for (ie single user or everyone), where you want to install it (again, something like C:\Pyton3.6 is a good choice), whether you want to have Python update the Environmental Variables (why, yes you do) and whether you want to have 'pip' installed (again yes you do).
You have changed the profile name and path in registry that's fine
But you have to also add new python path in environment variables
Please update new python path in Environment Variables
Steps:
Search Environment Variables in Cortana
Click on "Environment Variables"
In User Variables click on New
Now add the path of python
Close current cmd and open a new cmd to run python
I did open the installation file again (as administrator), then I click repair, somehow it could repair itself, creating another user in the users folder. Then I could uninstall it.
In the end, I install it again under my own username
As I'm continuing to work in docker-machine and Django, I'm trying to make a setup script for my project that auto-detects platform and decides how to set up Docker and the required containers. Auto-detection works fine. One thing I can't figure out is how to automatically set the environment variables needed for docker-machine to work on Mac OS X. Currently, the script will just tell the user to manually set the environment variable using the command
eval $(docker-machine env dev)
where dev is the name of the VM. This prompt happens after initial setup is successfully completed. The user is told to do this because the following subprocess call does not actually set the environment variables:
subprocess.call('eval $(docker-machine env dev)', shell=True)
If an error occurs during creating the VM because the VM already exists, then I use subprocess to see if Docker is already installed:
check_docker = subprocess.check_call('docker run hello-world', shell=True)
If this call is successful, then the script tells the user that Docker was already installed and then prompts the user to manually set the environment variables to be able to start the containers needed for the Django server to run. I had originally thought that the script behaved correctly in this scenario, but it turns out that it only appeared that way because I had already set the environment variables manually. Of course, I see now that the docker run command needs the environment variables to be set in order to work, and since the environment variables never get set in the script, the docker run test doesn't work. So, how am I supposed to correctly set the environment variables from Python? It seems like using subprocess is resulting in the wrong environment getting these variables set. If I do something like
subprocess.call('setdockerenv.sh', shell=True)
where setdockerenv.sh has the correct eval command, then I run into the same problem, which I'm guessing is rooted in using subprocess. Would os have something to do this properly where subprocess can't? It's important that I do this in the Python script, or else having the user manually set the environment variables and then manually test to see if docker is installed defeats the purpose of having the script.
You cannot use subprocess to change the environment, since any changes it makes are local to that process. Instead, (as you found) you can change your current environment via os.environ, and that is inherited by any other processes you subsequently create.
When someone says "edit your .plist file" or "your .profile" or ".bash_profile" etc, this just confuses me. I have no idea where these files are, how to create them if I have to do that, etc, and also why there seem to be so many different ones (why? Do they do different things?)
So could someone please explain very patiently to a previous Windows user (wanting desperately to become more familiar with the pleasant if initially somewhat confusing OS X world) how to do this step by step?
I need the variables to be set both for GUI applications and command line applications, and at the moment it's for an ant script that needs the variables, but there will most likely be other needs as well.
Please note that I have Lion too, since many of the answers you get Googling seem to be outdated for Lion...
Also note that I have practically zero experience using the Terminal. I'm willing to learn, but please explain for a novice...
First, one thing to recognize about OS X is that it is built on Unix. This is where the .bash_profile comes in. When you start the Terminal app in OS X you get a bash shell by default. The bash shell comes from Unix and when it loads it runs the .bash_profile script. You can modify this script for your user to change your settings. This file is located at:
~/.bash_profile
Update for Mavericks
OS X Mavericks does not use the environment.plist - at least not for OS X windows applications. You can use the launchd configuration for windowed applications. The .bash_profile is still supported since that is part of the bash shell used in Terminal.
Lion and Mountain Lion Only
OS X windowed applications receive environment variables from the your environment.plist file. This is likely what you mean by the ".plist" file. This file is located at:
~/.MacOSX/environment.plist
If you make a change to your environment.plist file then OS X windows applications, including the Terminal app, will have those environment variables set. Any environment variable you set in your .bash_profile will only affect your bash shells.
Generally I only set variables in my .bash_profile file and don't change the .plist file (or launchd file on Mavericks). Most OS X windowed applications don't need any custom environment. Only when an application actually needs a specific environment variable do I change the environment.plist (or launchd file on Mavericks).
It sounds like what you want is to change the environment.plist file, rather than the .bash_profile.
One last thing, if you look for those files, I think you will not find them. If I recall correctly, they were not on my initial install of Lion.
Edit: Here are some instructions for creating a plist file.
Open Xcode
Select File -> New -> New File...
Under Mac OS X select Resources
Choose a plist file
Follow the rest of the prompts
To edit the file, you can Control-click to get a menu and select Add Row. You then can add a key value pair. For environment variables, the key is the environment variable name and the value is the actual value for that environment variable.
Once the plist file is created you can open it with Xcode to modify it anytime you wish.
Your .profile or .bash_profile are simply files that are present in your "home" folder. If you open a Finder window and click your account name in the Favorites pane, you won't see them. If you open a Terminal window and type ls to list files you still won't see them. However, you can find them by using ls -a in the terminal. Or if you open your favorite text editor (say TextEdit since it comes with OS X) and do File->Open and then press Command+Shift+. and click on your account name (home folder) you will see them as well. If you do not see them, then you can create one in your favorite text editor.
Now, adding environment variables is relatively straightforward and remarkably similar to windows conceptually. In your .profile just add, one per line, the variable name and its value as follows:
export JAVA_HOME=/Library/Java/Home
export JRE_HOME=/Library/Java/Home
etc.
If you are modifying your "PATH" variable, be sure to include the system's default PATH that was already set for you:
export PATH=$PATH:/path/to/my/stuff
Now here is the quirky part, you can either open a new Terminal window to have the new variables take effect, or you will need to type .profile or .bash_profile to reload the file and have the contents be applied to your current Terminal's environment.
You can check that your changes took effect using the "set" command in your Terminal. Just type set (or set | more if you prefer a paginated list) and be sure what you added to the file is there.
As for adding environment variables to GUI apps, that is normally not necessary and I'd like to hear more about what you are specifically trying to do to better give you an answer for it.
Here's a bit more information specifically regarding the PATH variable in Lion OS 10.7.x:
If you need to set the PATH globally, the PATH is built by the system in the following order:
Parsing the contents of the file /private/etc/paths, one path per line
Parsing the contents of the folder /private/etc/paths.d. Each file in that folder can contain multiple paths, one path per line. Load order is determined by the file name first, and then the order of the lines in the file.
A setenv PATH statement in /private/etc/launchd.conf, which will append that path to the path already built in #1 and #2 (you must not use $PATH to reference the PATH variable that has been built so far). But, setting the PATH here is completely unnecessary given the other two options, although this is the place where other global environment variables can be set for all users.
These paths and variables are inherited by all users and applications, so they are truly global -- logging out and in will not reset these paths -- they're built for the system and are created before any user is given the opportunity to login, so changes to these require a system restart to take effect.
BTW, a clean install of OS 10.7.x Lion doesn't have an environment.plist that I can find, so it may work but may also be deprecated.
echo $PATH
it prints current path value
Then do vim ~/.bash_profile and write
export PATH=$PATH:/new/path/to/be/added
here you are appending to the old path, so preserves the old path and adds your new path to it
then do
source ~/.bash_profile
this will execute it and add the path
then again check with
echo $PATH
Unfortunately none of these answers solved the specific problem I had.
Here's a simple solution without having to mess with bash. In my case, it was getting gradle to work (for Android Studio).
Btw, These steps relate to OSX (Mountain Lion 10.8.5)
Open up Terminal.
Run the following command:
sudo nano /etc/paths (or sudo vim /etc/paths for vim)
Go to the bottom of the file, and enter the path you wish to add.
Hit control-x to quit.
Enter 'Y' to save the modified buffer.
Open a new terminal window then type:
echo $PATH
You should see the new path appended to the end of the PATH
I got these details from this post:
http://architectryan.com/2012/10/02/add-to-the-path-on-mac-os-x-mountain-lion/#.UkED3rxPp3Q
I hope that can help someone else
Simplified Explanation
This post/question is kind of old, so I will answer a simplified version for OS X Lion users.
By default, OSX Lion does not have any of the following files:
~/.bashrc
~/.bash_profile
~/.profile
At most, if you've done anything in the terminal you might see ~/.bash_history
What It Means
You must create the file to set your default bash commands (commonly in ~/.bashrc). To do this, use any sort of editor, though it's more simple to do it within the terminal:
%> emacs .profile
[from w/in emacs type:] source ~/.bashrc
[from w/in emacs type:] Ctrl + x Ctrl + s (to save the file)
[from w/in emacs type:] Ctrl + x Ctrl + c (to close emacs)
%> emacs .bashrc
[from w/in emacs type/paste all your bash commands, save, and exit]
The next time you quit and reload the terminal, it should load all your bash preferences. For good measure, it's usually a good idea to separate your commands into useful file names. For instance, from within ~/.bashrc, you should have a source ~/.bash_aliases and put all your alias commands in ~/.bash_aliases.
What worked for me is to create a .launchd.conf with the variables I needed:
setenv FOO barbaz
This file is read by launchd at login. You can add a variable 'on the fly' to the running launchd using:
launchctl setenv FOO barbaz`
In fact, .launchd.cond simply contains launchctl commands.
Variables set this way seem to be present in GUI applications properly.
If you happen to be trying to set your LANG or LC_ variables in this way, and you happen to be using iTerm2, make sure you disable the 'Set locale variables automatically' setting under the Terminal tab of the Profile you're using. That seems to override launchd's environment variables, and in my case was setting a broken LC_CTYPE causing issues on remote servers (which got passed the variable).
(The environment.plist still seems to work on my Lion though. You can use the RCenvironment preference pane to maintain the file instead of manually editing it or required Xcode. Still seems to work on Lion, though it's last update is from the Snow Leopard era. Makes it my personally preferred method.)
Setup your PATH environment variable on Mac OS
Open the Terminal program (this is in your Applications/Utilites folder by default).
Run the following command
touch ~/.bash_profile; open ~/.bash_profile
This will open the file in the your default text editor.
For ANDROID SDK as example :
You need to add the path to your Android SDK platform-tools and tools directory. In my example I will use "/Development/android-sdk-macosx" as the directory the SDK is installed in. Add the following line:
export PATH=${PATH}:/Development/android-sdk-macosx/platform-tools:/Development/android-sdk-macosx/tools
Save the file and quit the text editor.
Execute your .bash_profile to update your PATH.
source ~/.bash_profile
Now everytime you open the Terminal program you PATH will included the Android SDK.
Adding Path Variables to OS X Lion
This was pretty straight forward and worked for me, in terminal:
$echo "export PATH=$PATH:/path/to/whatever" >> .bash_profile #replace "/path/to/whatever" with the location of what you want to add to your bash profile, i.e: $ echo "export PATH=$PATH:/usr/local/Cellar/nginx/1.0.12/sbin" >> .bash_profile
$. .bash_profile #restart your bash shell
A similar response was here: http://www.mac-forums.com/forums/os-x-operating-system/255324-problems-setting-path-variable-lion.html#post1317516
Open Terminal:
vi ~/.bash_profile
Apply changing to system (no need restart computer):
source ~/.bash_profile
(Also work with macOS Sierra 10.12.1)
I had problem with Eclipse (started as GUI, not from script) on Maverics that it did not take custom PATH. I tried all the methods mentioned above to no avail. Finally I found the simplest working answer based on hints from here:
Go to /Applications/eclipse/Eclipse.app/Contents folder
Edit Info.plist file with text editor (or XCode), add LSEnvironment dictionary for environment variable with full path. Note that it includes also /usr/bin etc:
<dict>
<key>LSEnvironment</key>
<dict>
<key>PATH</key>
<string>/usr/bin:/bin:/usr/sbin:/sbin:/dev/android-ndk-r9b</string>
</dict>
<key>CFBundleDisplayName</key>
<string>Eclipse</string>
...
Reload parameters for app with
/System/Library/Frameworks/CoreServices.framework/Frameworks/LaunchServices.framework/Support/lsregister -v -f /Applications/eclipse/Eclipse.app
Restart Eclipse
Let me illustrate you from my personal example in a very redundant way.
First after installing JDK, make sure it's installed.
Sometimes macOS or Linux automatically sets up environment variable for you unlike Windows. But that's not the case always. So let's check it.
The line immediately after echo $JAVA_HOME would be empty if the environment variable is not set. It must be empty in your case.
Now we need to check if we have bash_profile file.
You saw that in my case we already have bash_profile. If not we have to create a bash_profile file.
Create a bash_profile file.
Check again to make sure bash_profile file is there.
Now let's open bash_profile file. macOS opens it using it's default TextEdit program.
This is the file where environment variables are kept. If you have opened a new bash_profile file, it must be empty. In my case, it was already set for python programming language and Anaconda distribution. Now, i need to add environment variable for Java which is just adding the first line. YOU MUST TYPE the first line VERBATIM. JUST the first line. Save and close the TextEdit. Then close the terminal.
Open the terminal again. Let's check if the environment variable is set up.
I took the idiot route.
Added these to the end of /etc/profile
for environment in `find /etc/environments.d -type f`
do
. $environment
done
created a folder /etc/environments
create a file in it called "oracle" or "whatever" and added the stuff I needed set globally to it.
/etc$ cat /etc/environments.d/Oracle
export PATH=$PATH:/Library/Oracle/instantclient_11_2
export DYLD_LIBRARY_PATH=/Library/Oracle/instantclient_11_2
export SQLPATH=/Library/Oracle/instantclient_11_2
export PATH=$PATH:/Library/Oracle/instantclient_11_2
export TNS_ADMIN=/Library/Oracle/instantclient_11_2/network/admin
It is recommended to check default terminal shell before setting any environment variables, via following commands:
$ echo $SHELL
/bin/zsh
If your default terminal is /bin/zsh (Z Shell) like in my case (Personally prefer Z Shell), then you should set these environment variable in ~/.zshenv file with following contents (In this example, setting JAVA_HOME environment variable, but same applies to others):
export JAVA_HOME="$(/usr/libexec/java_home)"
Similarly, any other terminal type not mentioned above, you should set environment variable in its respective terminal env file.
More detail, which may perhaps be helpful to someone:
Due to my own explorations, I now know how to set environment variables in 7 of 8 different ways. I was trying to get an envar through to an application I'm developing under Xcode. I set "tracer" envars using these different methods to tell me which ones get it into the scope of my application. From the below, you can see that editing the "scheme" in Xcode to add arguments works, as does "putenv". What didn't set it in that scope: ~/.MACOS/environment.plist, app-specific plist, .profile, and adding a build phase to run a custom script (I found another way in Xcode [at least] to set one but forgot what I called the tracer and can't find it now; maybe it's on another machine....)
GPU_DUMP_DEVICE_KERNEL is 3
GPU_DUMP_TRK_ENVPLIST is (null)
GPU_DUMP_TRK_APPPLIST is (null)
GPU_DUMP_TRK_DOTPROFILE is (null)
GPU_DUMP_TRK_RUNSCRIPT is (null)
GPU_DUMP_TRK_SCHARGS is 1
GPU_DUMP_TRK_PUTENV is 1
... on the other hand, if I go into Terminal and say "set", it seems the only one it gets is the one from .profile (I would have thought it would pick up environment.plist also, and I'm sure once I did see a second tracer envar in Terminal, so something's probably gone wonky since then. Long day....)
Step1: open ~/.bash_profile
Now a text editor opens:
Step2: variable name should be in capitals. in this example variable is NODE_ENV
Step3: export NODE_ENV=development
Save it and close.
Restart your system.
Done.
To check env variable: open terminal and type
echo $NODE_ENV
In README file of omniORBpy-3.4 is written that I have to set PYTHONPATH as
set PYTHONPATH=%PYTHONPATH%;%TOP%\lib\python;%TOP%\lib\x86_win32
Where %TOP% is the top-level omniORBpy directory. (Windows machine)
I have done that and reboot my machine but when I try to run *.py files which have a line like
import omniORB
it gives me an error that no such module omniORB.
What I should do?
I think you will find that the README file of omniORBpy says that TOP must be set to the "the root of your omniORB tree" and not omniORBpy.
Not sure here, but I don't think, that changes made to the environment via a batch script will persist across reboots. Try setting the variable via the Workstation properties (sorry, I have no Windows machine at hand, and cannot give more than a few general directions):
Right click on the Workstation icon on your desktop.
Select "Manage..." (I think it was)
Somewhere in the advanced settings, you can modify environment variables (no need to reboot, but you may have to fire up a new CMD.EXE afterwards, as running apps might not get the change).
Alternatively, you can create a small batch script to start you application, and make it modify the environment before the application is started (I think, this is, what the README actually suggests)