I've been given a piece of code which is a physical model (filename 'agnsim.py') and some instructions to run it which I'm confused by.
The instructions say that I should import the code using
import agnsim as agn
and then to run the model with
ed = agn.Wilp(dens=3., incr=0.2, drac=2.0)
The argument above in Wilp will configure the run.
My question is, how do I actually run this? Do I create a separate .py file that contains these two lines of code?
I've only ever run simple python programs before using e.g. >>>python file.py
You should literally just open up the python console and type those two lines in.
$python
import agnsim as agn
ed = agn.Wilp(dens=3., incr=0.2, drac=2.0)
Make sure that agnsim.py is located at the same folder level from which you start python. E.g. If you're in "My Documents" and "agnsim.py" is in my documents, you should cd to "My Documents" and then start python there (from the command line).
Related
Is it possible to have a Makefile grabing arguments from either config.ini or config.yml file?
Let's consider this example, we have a python main.py file which is written as a CLI. Not we do not want users to be filling arguments to a python CLI in terminal so we have an example config.ini file with the arguments:
PYTHON FILE:
import typer
def say_name(name:str):
print('runnig the code')
print(f'Hello there {name}')
if __name__ == "__main__":
typer.run(say_name)
config.ini FILE:
[argument]
name = person
Makefile FILE:
run_code:
python main.py ${config.ini.argument.name}
Is it possible to have a project infrastructure like this?
I am aware that Spacy project does exactly this. However I would like to some something like those even outside NLP project without the need of using spacy.
You need to find, or write, a tool which will read in your .ini file and generate a set of makefile variables from it. I don't know where you would find such a thing but it's probably not hard to write one using a python module that parses .ini files.
Suppose you have a script ini2make that will do this, so that if you run:
ini2make config.ini
it will write to stdout makefile variable assignment lines like this:
config.ini.argument.name = person
config.ini.argument.email = person#somewhere.org
etc. Then you can integrate this into your makefile very easily (here I'm assuming you're using GNU make) through use of GNU make's automatic include file regeneration:
include config.ini.mk
config.ini.mk: config.ini
ini2make $< > $#
Done. Now whenever config.ini.mk doesn't exist or config.ini has been changed since config.ini.mk was last generated, make will run the ini2make script to update it then re-execute itself automatically to read the new values.
Then you can use variables that were generated, like $(config.ini.argument.name) etc.
python program to print the current wallpaper path as output
i have tried this code but its not working
pip install py-wallpaper
from wallpaper import set_wallpaper, get_wallpaper
print(get_wallpaper())
set_wallpaper("location/to/image.jpg")
This shows the error that win-wallpaper is not regognised as internal or external command
how to print the path of current wallpaper path in windows using python?
The library have a bug. To overcome follow these steps.
1. Open wallpaper library directory and create a file name win-wallpaper.py.
2. Add following code into newly create module .
import ctypes,win32con
def getWallpaper():
ubuf = ctypes.create_unicode_buffer(512)
ctypes.windll.user32.SystemParametersInfoW(win32con.SPI_GETDESKWALLPAPER,len(ubuf),ubuf,0)
return ubuf.value
print(getWallpaper())
3. Then use pyinstaller to convert py to exe file.
Note: Don't use cmd for compile purpose .
pyinstaller --onefile -w 'win-wallpaper.py'
4. From dist folder take win-wallpaper.exe file to main directory.
Now, it is good to go.
But one thing you should not here, this library still not contain proper implementation of set_wallpaper(path) function. This contain lots of bug so please use last code stuff.
If you don't want to use this library then use this code.
import ctypes,win32con
def getWallpaper():
ubuf = ctypes.create_unicode_buffer(512)
ctypes.windll.user32.SystemParametersInfoW(win32con.SPI_GETDESKWALLPAPER,len(ubuf),ubuf,0)
return ubuf.value
def setWallpaper(path):
changed = win32con.SPIF_UPDATEINIFILE | win32con.SPIF_SENDCHANGE
ctypes.windll.user32.SystemParametersInfoW(win32con.SPI_SETDESKWALLPAPER,0,path,changed)
Right up front to be clear, I am not fluent in programming or python, but generally can accomplish what I need to with some research. Please excuse any bad formatting structure, as this is my first post to a board like this
I recently updated my laptop from Ubuntu 18.04 to 20.04. I created a full system backup with Dejadup, which due to a missing file, could not be restored. Research brought me to post on here from 2019 for manually restoring these files. The process called for 2 scripts, 1 to unpack and the second to reconstruct the files, both created by Hamish Downer.
The first,
"for f in duplicity-full.*.difftar.gz; do echo "$f"; tar xf "$f"; done"
seemed to work well and did unpack the files.
The second,
#!/usr/bin/env python3
import argparse
from pathlib import Path
import shutil
import sys"
is the start of a re-constructor script. Using terminal from within the directory I am trying to rebuild I enter the first line and return.
When I enter the second line of code the terminal just "hangs" with no activity, and will only come back to the prompt if I double click the cursor. I receive no errors or warnings. When I enter the third line of code
"from pathlib import Path"
and return I then get an error
from: can't read /var/mail/pathlib
The problem seems to originate with the "import argparse" command and I assume is due to a symlink.
argparse is located in /usr/local/lib/python3.8/dist-packages (1.4.0)
python3 is located in /usr/bin/
Python came with the Ubuntu 20.04 distribution package.
Any help with reconstructing these files would be greatly appreciated, especially in a batch as this script is meant to do versus trying to do them one file at a time.
Update: I have tried adding the "re-constructor" part of this script without success. This is a link to the script I want to use:
https://askubuntu.com/questions/1123058/extract-unencrypted-duplicity-backup-when-all-sigtar-and-most-manifest-files-are
Re-constructor script:
class FileReconstructor():
def __init__(self, unpacked_dir, restore_dir):
self.unpacked_path = Path(unpacked_dir).resolve()
self.restore_path = Path(restore_dir).resolve()
def reconstruct_files(self):
for leaf_dir in self.walk_unpacked_leaf_dirs():
target_path = self.target_path(leaf_dir)
target_path.parent.mkdir(parents=True, exist_ok=True)
with target_path.open('wb') as target_file:
self.copy_file_parts_to(target_file, leaf_dir)
def copy_file_parts_to(self, target_file, leaf_dir):
file_parts = sorted(leaf_dir.iterdir(), key=lambda x: int(x.name))
for file_part in file_parts:
with file_part.open('rb') as source_file:
shutil.copyfileobj(source_file, target_file)
def walk_unpacked_leaf_dirs(self):
"""
based on the assumption that all leaf files are named as numbers
"""
seen_dirs = set()
for path in self.unpacked_path.rglob('*'):
if path.is_file():
if path.parent not in seen_dirs:
seen_dirs.add(path.parent)
yield path.parent
def target_path(self, leaf_dir_path):
return self.restore_path / leaf_dir_path.relative_to(self.unpacked_path)
def parse_args(argv):
parser = argparse.ArgumentParser()
parser.add_argument(
'unpacked_dir',
help='The directory with the unpacked tar files',
)
parser.add_argument(
'restore_dir',
help='The directory to restore files into',
)
return parser.parse_args(argv)
def main(argv):
args = parse_args(argv)
reconstuctor = FileReconstructor(args.media/jerry/ubuntu, args.media/jerry/Restored)
return reconstuctor.reconstruct_files()
if __name__ == '__main__':
sys.exit(main(sys.argv[1:]))
I think you are typing the commands to the shell instead of python interpreter. Please check your prompt, python (started with python3) has >>>.
Linux has an import command (part of the ImageMagick) and understands import argparse, but it does something completely different.
import - saves any visible window on an X server and outputs it as an
image file. You can capture a single window, the entire screen, or any
rectangular portion of the screen.
This matches the described behaviour. import waits for a mouse click and then creates a large output file. Check if there is a new file named argparse.
An executable script contains instruction to be processed by an interpreter and there are many possible interpreters, several shells (bash and alternatives), languages like Perl, Python, etc. and also some very specialized like nft for firewall rules.
If you execute a script from the command line, the shell reads its first line. If it starts with #! characters (called "shebang"), it uses the program listed on that line. (note: /usr/bin/env there is just a helper to find the exact location of a program).
But if you want to use an interpreter interactively, you need to start it explicitly. The shebang line has no special meaning in this situation, only as the very first line of a script. Otherwise it is just a comment and is ignored.
I am new to Blender. I have created a simple project where I have added a text variable to it. The text I added here in Test. See image below.
Now, I want to call this script from the command line by to call this particular project file and pass in parameters like the text variable to display the text james instead of Test.
For example, typing the following command should give me video generated with the text james.
blender proj1.blend variable=james
Note: I am a beginner, and I hope I explained my question clearly.
Use python script, like
blender proj1.blend --python-expr "import bpy; bpy.data.curves['Text'].body = 'james'"
(if your text curve object called "Text")
Argument order is important - you want script to be executed after file is loaded.
You can find the arguments used to start blender listed in sys.argv, the same as if you were running a normal python script. Blender will ignore any arguments after --, your script can then find the -- argument and process any options after that.
blender -b --python maketext.py -- James
Then the contents of maketext.py would start with -
import bpy
import sys
idx = sys.argv.index('--') + 1
string_to_use = sys.argv[idx]
text_data = bpy.data.curves.new('txt', 'FONT')
text_data.body = string_to_use
text_obj = bpy.data.objects.new('text', text_data)
bpy.context.scene.objects.link(text_obj)
# animate and render
I have an OpenModelica model made with OMEdit. In order to get a concrete example I designed the following:
Now I would like to run the model in Python. I can do this by using OMPython. After importing OMPython and loading the files I use the following command to run the simulation:
result = OMPython.execute("simulate(myGain, numberOfIntervals=2, outputFormat=\"mat\")")
The simulation now runs and the results are written to a file.
Now I would like to run the same model but with an different parameter for the constant block.
How can I do this?
Since the parameter is compiled into the model it should not be possible to change it. So what I need is a model like that:
Is it possible to call the model from Python and set the variable "a" to a specific value?
With the command OMPython.execute("simulate(...)") I can specify some environment variables like "numberOfIntervals" or "outputFormat" but not more.
You can send more flags to the simulate command. For example simflags to override parameters. See https://openmodelica.org/index.php/forum/topic?id=1011 for some details.
You can also use the buildModel(...) command followed by system("./ModelName -overrideFile ...") to avoid re-translation and re-compilation or with some minor scripting parallel parameter sweeps. If you use Linux or OSX it should be easy to call OMPython to create the executable and then call it yourself. On Windows you need to setup some environment variables for it to work as expected.
I believe you are looking for the setParameterValue command. You can read about it here: https://openmodelica.org/download/OMC_API-HowTo.pdf
Basically you would add a line similar to OMPython.execute("setParameterValue(myGain, a, 20)") to your python script before the line where you run the simulation, so long as a is a parameter in your model.
Create one new folder in windows
In this folder put/create 2 new files file1.py and file2.bat
The file1.py content is:
import os
import sys
sys.path.insert(0, "C:\OpenModelica1.11.0-32bit\share\omc\scripts\PythonInterface")
from OMPython import OMCSession
sys.path.insert(0, "C:\OpenModelica1.11.0-32bit\lib\python")
os.environ['USER'] = 'stefanache'
omc = OMCSession()
omc.sendExpression("loadModel(Modelica)")
omc.sendExpression("loadFile(getInstallationDirectoryPath() + \"/share/doc/omc/testmodels/BouncingBall.mo\")")
omc.sendExpression("instantiateModel(BouncingBall)")
omc.sendExpression("simulate(BouncingBall)")
omc.sendExpression("plot(h)")`
the file2.bat content is:
#echo off
python file1.py
pause
then click on file2.bat... and please be patient!
The plotted result window will appear.