I've been through a lot of possible answers from here to everywhere, and it seems the problem persists.
What is causing this, and how can I fix it?
$ git push heroku master
Counting objects: 295, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (272/272), done.
Writing objects: 100% (295/295), 678.12 KiB | 8.07 MiB/s, done.
Total 295 (delta 114), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> App not compatible with buildpack: https://buildpack-registry.s3.amazonaws.com/buildpacks/heroku/python.tgz
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to mydjangoappblog.
remote:
To https://git.heroku.com/mydjangoappblog.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/mydjangoappblog.git'
My Procfile:
And gunicorn:
It seems your Procfile is not valid
Modify it as following:
web: gunicorn django_project.wsgi
Related
added requirement.txt, Procfile,
receving error while deploying site to heroku
what could be wrong with this
Enumerating objects: 110, done.
Counting objects: 100% (110/110), done.
Delta compression using up to 8 threads
Compressing objects: 100% (106/106), done.
Writing objects: 100% (110/110), 13.54 MiB | 1.30 MiB/s, done.
Total 110 (delta 35), reused 0 (delta 0), pack-reused 0
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Building on the Heroku-20 stack
remote: -----> Using buildpack: heroku/python
remote: -----> *App not compatible with buildpack: https://buildpack-
registry.s3.amazonaws.com/buildpacks/heroku/python.tgz*
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to covidcms.
remote:
To https://git.heroku.com/covidcms.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/covidcms.git'
You have to rename your requirement.txt file to requirements.txt
Heroku automatically recognizes your app as a Python app if it includes a requirements.txt or setup.py file in its root directory.
When a deployed application is recognized as a Python application, you’ll see this in the build output:
$ git push heroku master
-----> Python app detected
for more information check official doc. https://devcenter.heroku.com/articles/python-support#recognizing-a-python-app
I am trying to use $ git push heroku master but I get this error:
$ git push heroku master
Counting objects: 6, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (3/3), done.
Writing objects: 100% (6/6), 534 bytes | 534.00 KiB/s, done.
Total 6 (delta 0), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: ! The latest version of Python 3 is python-3.6.5 (you are using , which is unsupported).
remote: ! We recommend upgrading by specifying the latest version (python-3.6.5).
remote: Learn More: https://devcenter.heroku.com/articles/python-runtimes
remote: -----> Installing
remote: ! Requested runtime () is not available for this stack (heroku-16).
remote: ! Aborting. More info: https://devcenter.heroku.com/articles/python-support
remote: ! Push rejected, failed to compile Python app.
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to securibot.
remote:
To https://git.heroku.com/securibot.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/securibot.git'
My runtime.txt file reads the following:
python-3.6.5
Any idea why I'm getting this error?
Did you read the referenced URL that was posted?
If you look through https://devcenter.heroku.com/articles/python-runtimes, you will see that "Newly created Python applications default to the Python 3.6.4 runtime".
You can specify your own run time in either your Pipfile or creating a runtime.txt with the following:
python-3.6.5
I can't seem to figure out why my Heroku push keeps failing after hours and hours of research. The app works just fine in my terminal.
Counting objects: 12, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (10/10), done.
Writing objects: 100% (12/12), 5.80 KiB | 5.80 MiB/s, done.
Total 12 (delta 2), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> App not compatible with buildpack: https://codon-buildpacks.s3.amazonaws.com/buildpacks/heroku/python.tgz
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
remote:
remote: ! Push failed
remote: Verifying deploy...
remote:
remote: ! Push rejected to agile-brook-99462.
remote:
To https://git.heroku.com/agile-brook-99462.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/agile-brook-99462.git'
Things I have done:
Set buildpack to heroku/python
Set Python version to 2.7 with runtime.txt
Added requirements.txt
Added Procfile
Tried git push -f heroku master
Created a new app and re-tried all steps again
None of the above steps have remedied the situation. Any tips?
I am trying to push an django web app to heroku for the first time, and there are some error message as following.
Delta compression using up to 4 threads.
Compressing objects: 100% (68/68), done.
Writing objects: 100% (81/81), 105.31 KiB | 0 bytes/s, done.
Total 81 (delta 7), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Python app detected
remote: -----> Installing Python-3.5.0
remote: ! Requested runtime (Python-3.5.0) is not available for this stack
(cedar-14).
remote: ! Aborting. More info: https://devcenter.heroku.com/articles/pytho
n-support
remote:
remote: ! Push rejected, failed to compile Python app
remote:
remote: Verifying deploy...
remote:
remote: ! Push rejected to polar-lake-12528.
remote:
To https://git.heroku.com/polar-lake-12528.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/polar-lake-12528.git'
My runtime.txt looks like:
python-3.5.1
I have already changed to lowercase and update the version of python to 3.5.1, but still not working.
Python 3.5.0 is not supported. You can change it to python-3.5.1.
See https://devcenter.heroku.com/articles/python-runtimes#supported-python-runtimes for supported runtimes.
I am trying to deploy a django application on heroku.
Here is my proc file:
web: gunicorn playlist.wsgi --log-file -
Here is my requirments.txt:
dj-database-url==0.4.1
Django==1.9.6
gunicorn==19.5.0
whitenoise==3.0
Here is the error messege on git push heroku master
Counting objects: 191, done.
Delta compression using up to 4 threads.
Compressing objects: 100% (173/173), done.
Writing objects: 100% (191/191), 105.35 KiB | 0 bytes/s, done.
Total 191 (delta 91), reused 0 (delta 0)
remote: Compressing source files... done.
remote: Building source:
remote:
remote: -----> Using set buildpack heroku/python
remote:
remote: ! Push rejected, failed to detect set buildpack heroku/python
remote: More info: https://devcenter.heroku.com/articles/buildpacks#detection-failure
remote:
remote: Verifying deploy...
remote:
remote: ! Push rejected to shielded-fortress-12681.
remote:
To https://git.heroku.com/shielded-fortress-12681.git
! [remote rejected] master -> master (pre-receive hook declined)
error: failed to push some refs to 'https://git.heroku.com/shielded-fortress-12681.git'
EDIT
I have also tried:
heroku buildpacks:set heroku/python
I was putting the Procfile in the wrong place. It should be at the root of your repository.